HP L1750 User Manual page 34

Table 4-2 OSD Menu (continued)
Icon
28 Chapter 4 Operating the Monitor
Main Menu Submenu
Mode Display
Power-On Status
Display
DDC/CI Support
Bezel Power LED
Sleep Timer
Video Input
Control (select
models)
Switch Video Input
Description
Displays the resolution, refresh rate and frequency
information on the screen each time the OSD Main
Menu is accessed. Select:
● On
●
Off
The factory default is On.
Displays the operating status of the monitor each time
the monitor is powered on. Select the location to
display the status to:
●
Top
● Middle
●
Bottom
●
Off
The factory default is Top.
Allows the computer to control some OSD menu
features such as brightness, contrast and color
temperature. Set to:
●
On
● Off
The factory default is On.
Turns off the power LED on the front panel of the
monitor. The factory default is On.
Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in hours
and minutes
● Set Sleep Time—sets the time you want to place
the monitor in sleep mode
●
Set on Time—sets the time you want the monitor
to wake up from sleep mode
● Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Selects the video input signal. DVI is the factory
default.
Analog — VGA — Selects VGA input
Digital — DVI — Selects DVI input. This input accepts
either analog or digital signals.