HP L1750 User Manual page 35

Table 4-2 OSD Menu (continued)
Icon Main Menu
Information
Factory Reset
Exit
Submenu Description
Disable/Enable Auto- Enables or disables the system's automatic video
Switching signal input-switching feature. The factory default is
enabled.
Default Video Input Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The default input selection is DVI.
Analog — VGA — Selects VGA input.
Digital — DVI — Selects DVI input.
Selects and displays important information about the
monitor.
Current Settings Provides the current input video mode.
Recommended Provides the recommended resolution mode and
Settings refresh rate for the monitor.
Serial Number Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support: http://
www.hp.com/support
Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Exits the OSD menu screen.
Adjusting the Monitor Settings 29