Walker H27i Operator's Manual page 31

Assembly Instructions
Tilt­Up Hook and
Latch Connected
Tilt­Up Tilt­Up
Latch Hook
Deck Secured in TILT-UP Position
Hitch Pin
Tilt Bar
CHECK MOWER
SHARPNESS, AND SECURITY OF MOUNT­
ING
The blade mounting nuts on gear driven decks
should be torqued to 60 lb
blade mounting bolts on belt driven decks torqued to
· ·
70 lb ft (95 N m). If blade sharpening is required,
refer to CHECKING/SERVICING for Sharpen Mow-
Maintenance Instructions
er Blades in
PERFORM ANY ADDITIONAL PROCEDURES
called for on the MAINTENANCE SCHEDULE
CHART in Maintenance Instructions.
BLADE CONDITION,
· ·
ft (81 N m), and the
.
27