Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. DAP Audio COM-31 brings excitement to any venue. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry. New products are being launched regularly.
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! UNPACKING INSTRUCTIONS Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. Make sure you don’t use the wrong kind of cables or defective cables. ...
Description of the device Features The Com-31 is a Wireless Microphone Set from Dap Audio. • Multiple system use. • Simultaneous output use. • Noise squelch. • Included 1 dynamic hand-held microphone • Low battery Warning light. • max. 50m receiving distance •...
Fig. 2 8. Balanced audio output connector (Low Z). 9. Squelch Control. Adjust squelch control setting to emphasize either signal quality or system range. This control is factory preset and normally needs no adjustement. For more info see the section on Adjusting the squelch threshold on page 7.
Installation Remove all packing materials from the Com-31. Check that all foam and plastic padding is removed. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. Set Up and Operation Before plugging the unit in, always make sure that the power supply matches the product specification voltage.
Inserting/replacing the battery We recommend powering the microphone by a 9 V PP3 alkali battery. Fig. 5 Turn the battery compartment cover in the direction of the arrow and remove the cover. Insert the battery as shown. Please observe correct polarity when inserting the battery. ...
Approval The DAP D140573, 140580, 140673, 140680, D140773 and D140780 are Class II wireless devices. D140573: Set - 739,602Mhz for use in: Austria, Belgium, Czech Republic, France, Germany, Hungary, D140673 Italy, Luxemburg, Netherlands, Poland, Romania, Slovakia, D140773 Switzerland, Turkey, United Kingdom. D140580: Set - 807,396Mhz for use in: Belgium, Czech Republic, Denmark, France, Germany, Greece, D140680 Hungary,Italy, Luxemburg, Netherlands, Norway, Poland, Portugal,...
Declaration OF CONFORMITY This certifies that the following designated product: Name: COM-31 Vocal UHF Handheld set 739,602 Mhz Model No.: D140573 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC EN 300 422-1 V1.3.2(2008-03)
Page 12
CERTIFICATE OF CONFORMITY This certifies that the following designated product: Name: COM-31 Vocal UHF Handheld set 739,602 Mhz Model No.: D140573 Brand Name: DAP AUDIO (Product Identification) complies with the requirements of the European Union Directive 73/23/EEC This certificate is awarded following tests carried out on samples of the product referred to above.
Page 13
Declaration OF CONFORMITY This certifies that the following designated product: Name: COM-31 Vocal UHF Handheld set 807,396 Mhz use in NL Model No.: D140580 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC...
Page 14
CERTIFICATE OF CONFORMITY This certifies that the following designated product: Name: COM-31 Vocal UHF Handheld set 807,396 Mhz use in NL Model No.: D140580 Brand Name: DAP AUDIO (Product Identification) complies with the requirements of the European Union Directive 73/23/EEC This certificate is awarded following tests carried out on samples of the product referred to above.
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Maintenance DAP Audio COM-31 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean.