Subscribe to Our Youtube Channel
Related Manuals for jcb 21-18RS
Summary of Contents for jcb 21-18RS
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL 21-18RS Original Instructions IM-18RS-EN Iss: 06/2021...
- Page 2 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-18RS Designation of the tool: 18 - 18Vdc, RS - Reciprocating Saw 21-18RS Instruction & User Manual...
-
Page 3: Table Of Contents
VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Saw Blade Installation and Removal ON/OFF Trigger Cutting Action Selection Adjusting Pivoting Shoe Plate Sawing MAINTENANCE Transport and Storage WARRANTY STATEMENT Terms and Conditions EU/UK DECLARATION OF CONFORMITY 21-18RS Instruction & User Manual... -
Page 4: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 21-18RS Instruction & User Manual... -
Page 5: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. 21-18RS Instruction & User Manual... -
Page 6: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. 21-18RS Instruction & User Manual... -
Page 7: Tool Specific Safety Warnings
Ensure that sparks and metal cuttings are directed so as to not cause a hazard. Be aware that there is a running- on of the saw blade after the ON/OFF Trigger is released. 21-18RS Instruction & User Manual... - Page 8 Do not use dull or damaged blades. Unsharpened or improperly set blades produce narrow kerf causing excessive friction, blade binding and kickback. 21-18RS Instruction & User Manual...
-
Page 9: Charger Safety
This appliance can be used by children aged from 8 years and above To reduce risk of injury, only charge and persons with reduced physical, JCB rechargable batteries. The sensory or mental capabilities or charger and battery packs are specifically lack of experience and knowledge designed to work together. -
Page 10: Component List
HAND GRIP CHARGE INDICATOR *If applicable TOOL TECHNICAL DATA Voltage 18V DC (From Attached Battery) Stroke Rate : 0-3000/min Stroke Length 20mm Max. Cutting Depth (wood) 100mm Product Weight (Body only, w/o battery) 1.95 kg 21-18RS Instruction & User Manual... -
Page 11: Battery Technical Data
In this be used for the preliminary assessment of regard, all the operational cycle phases must exposure. be taken into consideration (such as the times when the tool is switched off or running idle). 21-18RS Instruction & User Manual... -
Page 12: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME (HAVS) IF USAGE IS NOT ADEQUATELY MANAGED. 21-18RS Instruction & User Manual... -
Page 13: Operating Instructions
Green Battery Charge Status Make sure the ON/OFF Trigger (6) is not operated when inserting or removing the Charger is connected to battery. Use only JCB batteries:21-20LI, 21- mains power 30-LI, 21-40LI and 21-50LI. Connected battery is charging Do not use excessive force when... -
Page 14: Saw Blade Installation And Removal
(5) and gradually Only use sizes and types of blades that are depress the ON/OFF variable speed Trigger recommended by JCB tools: do not use (6). other types or sizes. Avoid direct contact with the inserted saw... -
Page 15: Adjusting Pivoting Shoe Plate
Brush inspection Release the ON/OFF Trigger and wait one Brush inspection and replacement should or two seconds for the electronics to reset, only be performed by an authorised JCB then restart the power tool. service centre. 21-18RS Instruction & User Manual... -
Page 16: Transport And Storage
Power tool lubrication Ensure that the power tool is not at risk of tipping over or exposed to excessive JCB power tools are properly lubricated in vibration and shocks during transport, the factory and are ready for use. especially if the tool will be transported by Repairs and servicing car or other vehicle. - Page 17 21-18RS Instruction & User Manual...
-
Page 18: Warranty Statement
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible serial number. - Page 19 Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools 3 Year Warranty excludes the following (where applicable): Components normally subject to wear such as carbon brushes.
-
Page 20: Eu/Uk Declaration Of Conformity
UK Product Code No. JCB-18RS-B, 21-18RS-B DECLARATION: EU Product Code No. JCB-18RS-B-E Factory Reference No. PLCUL-769 Yellow and Black Tools Ltd. (T/A: JCB Tools) Name: IDENTIFICATION DETAILS OF Unit 55 Romsey Industrial Estate, Greatbridge Road Address: MANUFACTURER: Romsey, Hampshire SO51 0HR...
Need help?
Do you have a question about the 21-18RS and is the answer not in the manual?
Questions and answers