Page 1
POWER TOOL INSTRUCTION & USER MANUAL 21-RH1050 Original Instructions IM-RH1050-EN Iss: 06/2021 2854 21-RH1050 Rotary Hammer Manual.indd 1 2854 21-RH1050 Rotary Hammer Manual.indd 1 08/07/2021 15:02 08/07/2021 15:02...
Page 2
The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 2 2854 21-RH1050 Rotary Hammer Manual.indd 2 08/07/2021 15:02 08/07/2021 15:02...
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 4 2854 21-RH1050 Rotary Hammer Manual.indd 4 08/07/2021 15:02 08/07/2021 15:02...
At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 6 2854 21-RH1050 Rotary Hammer Manual.indd 6 08/07/2021 15:02 08/07/2021 15:02...
THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 10 2854 21-RH1050 Rotary Hammer Manual.indd 10 08/07/2021 15:02 08/07/2021 15:02...
Place the tool on a stable surface, for example a work bench. Clean tools and grease with a thin layer of machine grease before fitting. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 11 2854 21-RH1050 Rotary Hammer Manual.indd 11 08/07/2021 15:02 08/07/2021 15:02...
If the tool shall remain unused for any length of time, it should be stored in the original packaging. 21-RH1050 Instruction & User Manual 2854 21-RH1050 Rotary Hammer Manual.indd 13 2854 21-RH1050 Rotary Hammer Manual.indd 13 08/07/2021 15:02 08/07/2021 15:02...
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible serial number.
Page 15
Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools 3 Year Warranty excludes the following (where applicable): Components normally subject to wear such as carbon brushes.
Need help?
Do you have a question about the 21-RH1050 and is the answer not in the manual?
Questions and answers