Subscribe to Our Youtube Channel
Related Manuals for jcb 21-18MT
Summary of Contents for jcb 21-18MT
- Page 1 POWER TOOL INSTRUCTION & USER MANUAL 21-18MT Original Instructions IM-18MT-EN Iss: 06/2021...
- Page 2 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. 21-18MT Instruction & User Manual...
-
Page 3: Table Of Contents
CHARGER TECHNICAL DATA NOISE INFORMATION VIBRATION INFORMATION OPERATING INSTRUCTIONS Intended Use Battery Replacing Accessories Selecting Sandpaper Fitting and Replacing Sandpaper Sanding Sawing Scraper Maintenance Transport and Storage WARRANTY STATEMENT Terms and Conditions EU/UK DECLARATION OF CONFORMITY 21-18MT Instruction & User Manual... -
Page 4: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 21-18MT Instruction & User Manual... -
Page 5: Power Tool Use And Care
Use of any other accessories, or storing power tools. Such battery packs may create a risk of injury and fire. preventive safety measures reduce the risk of starting the power tool accidentally. 21-18MT Instruction & User Manual... -
Page 6: Service
This will ensure that the safety of the power tool is maintained. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. 21-18MT Instruction & User Manual... -
Page 7: Tool Specific Safety Warnings
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock. 21-18MT Instruction & User Manual... -
Page 8: Charger Safety
To reduce risk of injury, only charge if they have been given supervision JCB rechargable batteries. The or instruction concerning use of charger and battery packs are specifically the appliance in a safe way and designed to work together. - Page 9 21-18MT Instruction & User Manual...
-
Page 10: Component List
SPEED CONTROL VENTILATION OPENINGS ACCESSORY ADAPTOR CHARGER* BATTERY PACK* - PLEASE REFER TO TABLE ON PAGE 11 FOR BATTERY INFORMATION BATTERY TEST BUTTON AND CHARGE Battery size shown for illustrative purposes only INDICATOR* *If applicable 21-18MT Instruction & User Manual... -
Page 11: Tool Technical Data
14.4 - 18V d.c. 4.0A 21-18VDC 100-240V AC, 50-60Hz, 200W 20.5V d.c. 2 x 3.5A NOISE INFORMATION A-Weighted Sound Pressure (LpA) 73.00 dB(A) A-Weighted Sound Power (LwA) 84.00 dB(A) Wear ear protection when sound pressure is over 80 dB(A) 21-18MT Instruction & User Manual... -
Page 12: Vibration Information
Avoid using tools in temperatures of 10 ° exposure. or less. Plan your work schedule to spread any high THIS TOOL MAY CAUSE HAND-ARM vibration tool use across a number of days. VIBRATION SYNDROME IF USAGE IS NOT ADEQUATELY MANAGED. 21-18MT Instruction & User Manual... -
Page 13: Operating Instructions
Make sure the power switch is not pressed mains power in when inserting or replacing the battery. Connected battery is Use with JCB batteries only: 21-20LI, 21- charging 30-LI, 21-40LI and 21-50LI. Connected battery is fully Do not force the battery when charged connecting it, use moderate pressure. -
Page 14: Replacing Accessories
Sandpaper with fine grit is suitable for Do not angle the tool to sand with sanding untreated wood when a soft and only one edge as this can damage smooth surface is required. the sanding pad prevent the sandpaper fastening properly. 21-18MT Instruction & User Manual... -
Page 15: Sawing
Never open the tool. The tool has no Move the scraper at a slight angle to the internal parts that the user can service or repair. Never try to repair the tool yourself. workpiece. Take to an authorised service centre. 21-18MT Instruction & User Manual... -
Page 16: Transport And Storage
Ensure that the tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the tool will be transported by car or other vehicle. NOTE Operating temperature: 0-40 °C Storage temperature: 20-60 °C 21-18MT Instruction & User Manual... - Page 17 21-18MT Instruction & User Manual...
-
Page 18: Warranty Statement
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE and UKCA mark and a visible serial number. - Page 19 Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools 3 Year Warranty excludes the following (where applicable): Components normally subject to wear such as carbon brushes.
-
Page 20: Eu/Uk Declaration Of Conformity
JCB-18MT-B, 21-18MT-B DECLARATION: EU Product Code No. JCB-18MT-B-E Factory Reference No. PLML-767 Name: Yellow and Black Tools Ltd. (T/A: JCB Tools) IDENTIFICATION DETAILS OF Unit 55 Romsey Industrial Estate, Greatbridge Road Address: MANUFACTURER: Romsey, Hampshire SO51 0HR Country: Authorised Representative Service...
Need help?
Do you have a question about the 21-18MT and is the answer not in the manual?
Questions and answers