OSP Home Furnishings OSP Designs BNN25 Assembly Instructions

Bandon writing desk

November, 2018

BNN25

BANDON WRITING DESK

Assembly Instructions - Important:

Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when

assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or

information on other products, please visit our website: www.officestar.net or call or write us.

Table of Contents

Do you have a question about the OSP Designs BNN25 and is the answer not in the manual?

Page 1 November, 2018 BNN25 BANDON WRITING DESK Assembly Instructions - Important: Carefully unpack and identify each component before attempting to assemble. Refer to parts list. Please take care when assembling the unit and always set the parts on a clean, soft surface. If you require any assistance with assembly, parts or information on other products, please visit our website: www.officestar.net or call or write us.
Page 2 LIMITED WARRANTY OSP Home Furnishings™ warrants to the original purchaser that this product will be free from defects in material and workmanship as described below. OSP Home Furnishings™ will repair or replace, at its option, without charge to the original purchaser only, defective products or parts for one (1) year from the date of purchase.
Page 3 PARTS LIST (A) Top (1 PC) (B) Leg (4 PCS) HARDWARE LIST DRAWING DESCRIPTION SIZE QUANTITY Bolt 1/4 x 60mm 8 PCS Lock Washer 8 PCS 1/4” Flat Washer 8 PCS 1/4” x 19mm Knob w/ Bolt 5/32” 1 SET Wrench 1 PC...
Page 4 STEP 1 DO NOT FULLY TIGHTEN LEGS (B) AND BOLTS (1). STEP 2 TURN DESK TO THE UPRIGHT POSITION, APPLY FIRM PRESSURE TO ALIGN & FULLY TIGHTEN BOLTS (1) AND LEGS (B). SLIDE DRAWER INTO TOP (A).