For Better Sound (For Dvd Features) - FUNAI DBVR-7510S Owner's Manual

If your TV has no scart input jack but has an
S-VIDEO input jack,
1) Follow the steps 1)
to
2) Connect the S-VIDEO OUT jack on this unit to the
S-VIDEO input jack on your TV.
3) Connect the ANALOG AUDIO OUT jacks of this unit
to the analogue audio input jacks of your TV.
4) Plug in the TV and this unit.
Note: •
The S-VIDEO connection only supplies video
(picture) in the DVD mode.
•
Set "DOLBY DIGITAL" to "PCM" for the Audio
setting in the setup mode.
Playing a DVD using incorrect settings may generate
noise distortion and may also damage the speakers.
(Refer to page 24.)
DVD/VCR
DVD DVD
DIGITAL DIGITAL ANALOG ANALOG S-VIDEO S-VIDEO
AUDIO OUT AUDIO OUT AUDIO OUT AUDIO OUT OUT OUT
(not supplied)
L
COAXIAL COAXIAL
R
(Back of the unit)

For Better Sound (for DVD Features)

These 2 connections are optional for better sound.
1) For clear digital sound quality, use the DIGITAL AUDIO
OUT (COAXIAL) jack for the connection to your digital
audio system.
•If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
Dolby Digital decoder
or MPEG decoder
DVD/VCR
Hints for connecting to a Dolby Digital
decoder or MPEG decoder
• By connecting this unit to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Multi-channel Dolby
Digital surround sound as heard in the movie theaters.
• A digital component with a built-in MPEG 2 or Dolby
TM
Digital allows you to enjoy the surround sound while
producing the effecting of being in a movie theater or a
concert hall.
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder, and set "DOLBY DIGITAL" to
"BITSTREAM" in the AUDIO menu. (Refer to page 24.)
• If output is MPEG encoded audio, connect to an MPEG
decoder, and set "MPEG" to "BITSTREAM" in the
AUDIO menu. (Refer to page 24.)
4)
in the "Connecting to a TV".
TV
Audio cable
AUDIO
IN
L S-VIDEO
S-Video cable
IN
R
(not supplied)
Digital Audio
Input jack
COAXIAL
DIGITAL
AUDIO OUT
COAXIAL
Hints for connecting to an MD deck or DAT
deck
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set "DOLBY
DIGITAL" to "PCM" in the AUDIO menu. Playing a
DVD using incorrect settings may generate noise
distortion, and damage the speakers. (Refer to page 24.)
• Set "DOLBY DIGITAL" and "MPEG" to "PCM" in the
AUDIO menu for connecting to an MD deck or DAT
deck. (Refer to page 24.)
2) For dynamic sound effects, use the ANALOG AUDIO
OUT jacks for the connection to your audio system.
AUDIO SYSTEM
DVD/VCR
Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
'MP3 SURROUND' and its logo are trademarks
of Thomson S.A.
Note: Supply of this product does not convey a license nor
imply any right to distribute content with this product in
revenue-generating broadcast systems (terrestrial, satellite,
cable and/or other distribution channels), streaming
Coaxial
applications (via Internet, intranets and/or other
cable
networks), other content distribution systems (pay-audio
(not supplied)
or audio-on-demand applications and the like) or on
physical media (compact discs, digital versatile discs,
semiconductor chips, hard drives, memory cards and the
like). An independent license for such use is required. For
details, please visit http://mp3licensing.com.
8
Audio
L R
Audio cable
(not supplied)
ANALOG
AUDIO OUT
L
R
EN