Table of Contents
Advertisement
7) Press
SETUP
to exit.
MENU
TIMER
SET UP
INITIAL
MOVE
P01:
02
P06:
07
P02:
03
P07:
08
P03:
[
04
]
P08:
09
P04:
05
P09:
10
P05:
06
P10:
11
Position
Channel
Number
Number
MOVE
P01:
02
P06:
07
P02:
03
P07:
08
P03:
11
P08:
09
P04:
05
P09:
10
[
P05:
06
P10:
04
VCR Operation
VCR Features
Ensure that all VCR setting begins in VCR mode by pressing
VCR
. (Make sure that the VCR OUTPUT indicator is lit.)
Playback
1) Turn on the TV and select the video channel on the TV.
2) Insert a pre-recorded tape.
•The unit will turn on automatically. If the erase-
prevention tab has been removed, the unit will start
playback automatically.
•If the unit's power was already on, press
to VCR mode.
3) If playback does not start automatically, press
PLAY
press
.
B
<If a tape is already in the unit...>
•Using the buttons on the unit
PLAY
Just press
on the unit. Power will automatically
B
turn on and playback will start. (Direct Button
Operation)
•Using the buttons on the remote control
STANDBY-ON
Press
STOP
4) Press
to stop playback.
C
Tracking Adjustment
• Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback.
• When playing pre-recorded tapes or tapes recorded on the
units other than your own, noise lines (black and white
streaks) may appear on the playback picture. If this occurs,
you can adjust the tracking control manually by pressing
CHANNEL
(
/
) until the streaks disappear. To return to
K
L
the DTR function, stop the tape once and start playback
again.
• You can reduce the noise lines by pressing
in Slow mode, too. Slow tracking adjustment is not set
automatically.
• In the Still mode, press
until the streaks disappear. To return to the Still mode,
press
PAUSE
again.
F
INITIAL
CH TUNING
CLOCK
CH TUNING
AUTO
MANUAL
MOVE
MOVE
P01:
02
P02:
03
P03:
11
P04:
05
P05:
06
]
VCR
to switch
VCR
to turn on, and then press
CHANNEL
CHANNEL
, and press
g
P06:
07
P07:
08
P08:
09
P09:
10
P10:
04
Speed Search
1) Press
g
high speed in either a forward or reverse direction. In this
mode, the sound will be muted.
2) Press the button again, the unit will now search in super
high speed. (This function will not operate for a NTSC
tape.)
3) Press
PLAY
Still Picture
Press
PAUSE
TV screen.
• When the picture begins to vibrate vertically, stabilize the
picture by pressing
, then
• After the unit has been in Still mode for 5 minutes, it will
stop automatically to protect the tape and the video head.
<Note for "Speed Search" and "Still Picture">
• Usually there will be video "noise" lines (black and white
streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the "noise"
lines, be black and white.
This is not a fault of the unit but merely a by-product of
PLAY
.
B
the technology involved in producing a DVD/VCR with
LP mode.
Slow Motion
PAUSE
• Press
The unit mutes the sound during slow motion. You can
control the speed by pressing
PLAY
Press
• If it is left in the Slow mode for more than 5 minutes, the
unit will automatically switch to the Stop mode.
Auto Repeat Playback
(
/
)
K
L
The unit has an auto repeat function that allows you to repeat
a tape indefinitely without touching
• Use the remote control for this procedure.
(
/
)
K
L
• Insert a pre-recorded tape.
11
or
during playback to view a videotape at a
h
to return to normal playback.
B
during playback to view a still picture on the
F
CHANNEL
(
/
) in the Still mode.
K
L
, then
to reduce the playback speed.
F
g
(faster) or
g
to return to normal playback.
B
PLAY
(slower).
h
.
B
EN
Advertisement
Table of Contents
