Copying A Video Tape; Status Display; Real Time Tape Counter; Automatic Operations - FUNAI DBVR-7510S Owner's Manual

If you want to use the unit during a Timer
Recording or while the
flashing.
• Press STANDBY-ON to turn on the unit. Press
remote control to choose DVD mode, then continue with
the other DVD features as described in this manual. You
don't need to set the TIMER off to use the unit.
Note (for Timer Recording) :
• If there is a power failure or the unit is unplugged for more
than 30 seconds, clock and all timer settings will be lost.

Copying a Video Tape

You can make copies of videotapes made by friends or relatives
for your own enjoyment.
Connect the recording DVD/VCR (this unit), playing VCR
(another VCR) and your TV as outline in the following
diagrams.
Using scart jacks
Playing VCR
to 21-Pin Scart jack
Using AV front terminals
to the video output jack
to the audio output jack
Recording DVD/VCR (this unit)
STANDBY-ON
REW F.FWD
to 21-Pin Scart jack
indicator is on or
DVD
Recording DVD/VCR
(this unit)
DVD
DIGITAL ANALOG S-VIDEO
AUDIO OUT AUDIO OUT OUT
L
VCR AV2 (DECODER)
DVD/VCR AV1 (TV)
COAXIAL
R
to 21-Pin Scart jack
(TV)
Playing VCR
OPEN/CLOSE
PAL
OUTPUT
VCR DVD DISC IN
STOP/EJECT PLAY REC/OTR SKIP STOP PLAY SKIP
CHANNEL
REV FWD
to AV1 (TV)
Scart jack on
the back of the
DVD/VCR
(TV)
1) Insert a pre-recorded videocassette into the playing VCR.
2) Insert video cassette tape with its erase-prevention tab in
place into the cassette compartment of the recording unit.
3) Press SPEED/SYSTEM
on the
speed (SP/LP).
4) Select "AV2" or "AV3" position on the recording unit.
See "External Input Mode (for VCR Features)". (Refer to
page 9.)
5) Press REC/OTR
6) Begin playback of the tape in the playing VCR.
7) To stop recording, press
unit, then stop playback of the tape in the playing VCR.
Note: •
For best results during dubbing, use the unit's front
panel controls whenever possible. The remote control
might affect the playing VCR's operation.
• If video or colour fades in and out, you may be
copying a copy guarded video tape.
•
Unauthorised recording of copyrighted materials may
infringe on the rights of copyright owners, violate
copyright laws and may not record clearly.

Status Display

To check the Counter, or Clock & Channel number, press
DISPLAY
. Each time you press
change as illustrated:
When you select the channel using
the desired channel (position number).
AERIAL
RF OUT
<OFF mode>
Note: •
If the on-screen display shows an abnormal reading or
no reading, unplug this unit for 30 seconds, then plug
it in again.
Please note that clock and timer settings will be cleared
after disconnection.

Real Time Tape Counter

• This counter shows the elapsed recording or playback time
in hours, minutes, and seconds on screen. (Nothing is
shown in the case of blank portion.)
• The " – " indication will appear when the tape is rewound
further than the tape counter position "0:00:00".

Automatic Operations

Automatic Rewind, Eject
When the end of a tape is reached during recording, playback
or fast-forward, the tape will be automatically rewound to the
beginning. After that, the unit will eject the tape.
• The unit will not rewind the tape automatically during
Timer Recording or One Touch Recording.
Tape Eject
A tape can be ejected with the unit power on or off (but the
unit must be plugged in).
• If a Timer Recording is set, press
eject a tape.
15
to select the desired recording
on the recording unit.
STOP/EJECT
DISPLAY
the Number buttons
<COUNTER mode>
■
SP
Press once. Press once.
0:12:34
Press once.
STOP/EJECT
on the recording
, TV screen will
, select
<CLOCK and CHANNEL
NUMBER mode>
■
17:40
SP
P02
twice to
EN