Table of Contents
Advertisement
Function Overview
Front Panel Indicator Lights
Lights up when the progressive scan system is activated.
Lights up during a recording or one-touch timer
recording (OTR). Blinks when a recording is paused.
Lights up when the Unit is turned on.
Selecting DVD or VCR Operation
You must first select either DVD or VCR operation.
VCR MODE
Press [VCR
] on the Remote Control.
(The VCR SOURCE light will illuminate.)
DVD MODE
Press [DVD
] on the Remote Control.
(The DVD SOURCE light will illuminate.)
Front & Rear Terminals
rear panel
1: DVD AUDIO OUT* (analog) jacks
Connect audio cables from here to the audio input jack of your television
or audio device.
2: DVD/VCR AUDIO OUT jacks
Connect audio cables from here to the audio input jack of your television
or audio device. Standard connection for DVD/VCR use.
3: VCR AUDIO IN jacks
Connect a stereo audio cable from the audio output jacks of your
camcorder, VCR, etc. to here. After making the connection, press [INPUT
SELECT] on the Remote Control. Select "L1" to activate the rear AUDIO IN
jacks or "L2" to activate the front jacks.
4: VCR VIDEO IN jack
Connect a video cable from the video output jack of your camcorder, VCR,
etc. to this Unit. After making the connection, press [INPUT SELECT] on
the Remote Control. Select "L1" to activate the rear VIDEO IN jack or "L2" to
activate the front jack.
EN
Lights up when the timer recording or
one-touch timer recording (OTR) has been set.
1
2
3
DVD
DVD/VCR
VCR
DIGITAL
AUDIO
S-VIDEO
COMPONENT
AUDIO OUT
AUDIO IN
VIDEO OUT
AUDIO OUT
OUT
OUT
Y
L
L
L
C
/
B
R
R
P
B
COAXIAL
VIDEO OUT
VIDEO IN
R
C
/
R
P
R
7 6 5
8
4
Lights up when this Unit
is in the DVD mode.
Lights up when this Unit is in the VCR mode.
front panel
L1 L
L2
4
3
5: DVD/VCR VIDEO OUT jack
Connect a video cable from here to the VIDEO input jack of your televi-
sion or audio device. Standard connection for DVD/VCR use.
6: COMPONENT VIDEO OUT* jacks
Connect a component video cable from here to the component video
input jack on your television.
7: S-VIDEO OUT* jack
Connect an S-video cable from here to the S-video input jack on your
television.
8: DIGITAL AUDIO OUT COAXIAL* jack
Connect a digital audio coaxial cable from here to the digital audio input
jack on your digital audio receiver.
* For enhanced DVD viewing. DVD/VCR video and audio connections
required to view cassette tapes.
Note(s):
• Audio and video cables are included for both VCR and DVD viewing. You
can enhance your DVD picture and sound quality with an S-video cable, a
component video cable or a digital audio coaxial cable. Please purchase
the necessary cables at your local store. (Refer to pages 6-7.)
– 9 –
Lights up when the inserted disc
is being played back.
Blinks when an unplayable disc
is inserted.
1
4
7
VCR button
DVD button
DVD SOURCE light
VCR SOURCE light
Continued on next page.
2
3
5
6
8
9
0
+10
OK
Advertisement
Table of Contents
