Table of Contents
Advertisement
Time Search
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you wish to skip in order to
reach the point.
If a tape includes both programmes recorded in the PAL
system and ones recorded in the NTSC system, this function
may not be operated correctly.
• Use the remote control for this procedure.
1) Press
VCR
SEARCH
, then
2) Press
or
repeatedly until the desired time appears.
K
L
3) Press
or
to start Time Search.
s
B
•The unit begins rewinding or fast forwarding to the
specified point. When 0:00 is reached, the unit will start
playback automatically.
Note: •
Time Search can be set up to 9 hours 59 minutes
(9:59).
•
This function will not operate in the Recording mode.
•
Operations must be followed up within 30 seconds
2)
3)
from steps
to
will be cancelled.
•
To exit the Time Search mode, press
STOP
or press
C
Recording
Viewing and Recording the Same Programme
1) Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point
at which you want to begin recording.) Press
2) Press
the Number buttons
the channel to be recorded.
3) Press
SPEED/SYSTEM
4) Press
REC/OTR
to begin recording.
•The REC/OTR indicator on the front panel comes on.
5) Press
STOP
when recording is completed.
C
Two Different Tape Speeds
Before recording, select the tape speed: SP mode (Standard
Play) or LP mode (Long Play). The table below shows the
maximum recording/playback time using E-60, E-120, E-180
or E-240 tapes in each mode.
Tape Type
Tape Speed
SP Mode
E-60
1 hour
E-120
2 hours
E-180
3 hours
E-240
4 hours
Skipping Unwanted Programme Material During
Recording
1) Press
PAUSE
when you want to temporarily halt
F
recording.
You can check the remaining pause time with
the TV screen. Each
C
minutes, the unit will automatically switch to the Stop
mode to prevent tape damage.
2) Press
PAUSE
or
REC/OTR
F
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
start recording, follow steps
Recording the Same Programme". Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
twice.
, otherwise the Time Search mode
SETUP
3)
after step
.
VCR
or
CHANNEL
(
/
) to select
K
L
to select the tape speed (SP/LP).
Recording/Playback Time
LP Mode
2 hours
4 hours
6 hours
8 hours
C
mark represents 1 minute. After 5
to resume recording.
1)
to
4)
in the "Viewing and
Assemble Function
You can record in continuation from previous programme on
a pre-recorded tape.
1) Insert a pre-recorded tape. Press
2) Press
PAUSE
3) Press
REC/OTR
mode.
4) Press
CHANNEL
recorded.
5) Press
REC/OTR
6) Press
STOP
Note: •
DVD to VCR dubbing via the DVD/VCR deck of
this unit is not supported.
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
1) Follow steps
Programme".
2) Press
REC/OTR
length appears in the upper left corner of the TV screen.
2)
in step
I
(Normal
recording)
Recording stops when 0:00 is reached.
• To check time remaining during an OTR, press
.
• To change the recording length during an OTR, press
REC/OTR
• To stop an OTR before recording is finished, press
STOP
C
• To cancel the OTR but continue recording, press
repeatedly until "I" appears without the recording length.
Timer Recording
You may programme the unit to start and end a recording
while you are away. You can set 8 programmes to record on
specific days, daily or weekly within a 1-year period.
• Use the remote control for this procedure.
• Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point at
which you want to begin recording.)
1) Press
VCR
2) Press
K
Note: •
If you have not set the clock yet, "CLOCK" setting
menu appears. If so, follow the steps outlined in the
"Setting the Clock". (Refer to page 9.) Then, set the
timer.
marks on
• When you press
7)
, the input mode will move to the next item.
• If you do not press
the input mode will move to the next item.
• Press
s
setting during steps
TIMER NUMBER is flashing, the entire programme
contents will be erased.
3) Programme number flashes. Press
the desired programme number appears. Then, press
4) Select once, daily, everyday or weekly recording.
For once-only recording
the relevant month appears, and then press
repeatedly until your desired day appears.
13
PLAY
at the desired point on the tape.
F
. The unit will be in the Recording Pause
(
/
) to select the channel to be
K
L
or
PAUSE
. The recording will begin.
F
when recording is completed.
C
REC/OTR
.
1)
3)
to
in "Viewing and Recording the Same
repeatedly until the desired recording
I [0:30]
I[1:00]...
(OTR:
30 minutes)
repeatedly until the desired length appears.
.
, then
SETUP
.
or
to select "TIMER", then press
L
after pressing
B
K
within 5 seconds of setting an item,
B
to go back to the previous item from the current
4)
to
8)
. If
s
: Press
K
to start playback.
B
I[7:30]
I[8:00]
DISPLAY
.
REC/OTR
.
B
or
during steps
3)
to
L
is pressed when the
or
repeatedly until
K
L
.
B
or
repeatedly until
L
or
K
L
EN
Advertisement
Table of Contents
