Index Search; Time Search; Repeat Playback; Repeat A-B Playback - FUNAI DV220FX5 Owner's Manual

4) Use [K] or [L] to enter the number you want to jump
to.
• To move the digit that you wish to change, press [0]
or [1].
5) After all digit numbers are entered, press [ENTER].
Playback of the selected scene will start.

Index Search

Press first.
V V S VHS VHS VHS VHS V V V VHS
1) Press [SEARCH].
2) Use [K] or [L] to select a desired index number.
3) Press [0] to Fast Rewinding or [1] to Fast Forwarding.
4) When the cassette tape has reached an index mark,
playback will start automatically.
• The time gap between index marks must be more
Note:
than 1 minute for SP mode, 2 minutes for LP mode
and 3 minutes for SLP mode.
• The index search is not available during recording.
• Press [STOP C] to stop the search.
• If a cassette tape ends during a search, the index
search will be cancelled and the unit will rewind to
the beginning of the cassette tape.

Time Search

Press
1) Press [SEARCH].
2) Press cursor [1] to highlight the time.
3) Enter the desired time.
• Press [0] or [1] to move the digit that you wish to
change.
• Press [K] or [L] to change the number.
4) Press [ENTER].
Press first.
VHS VHS V V VHS V VHS V VHS V S
1) Press [SEARCH] twice.
2) Use [K / L] to select a desired time. Then, press cursor
[1] to Fast Forward, or press [0] to Fast Rewind. When
the cassette tape is reaches to the selected time,
playback will start automatically.
• For DVD and audio CD, press [CLEAR] to erase the
Note:
incorrect input at step 3.
• For audio CD, the random playback will be cleared
when you select time search during random
playback.
• For VCR, press [STOP C] to stop the search.
• For VCR, if a cassette tape ends during a search,
the time search will be cancelled and the unit will
rewind to the beginning of the cassette tape.
• The time search is not available during recording of
the VCR.
EN
ADVANCED PLAYBACK
first.
Title 01 / 06 Chapter 003 / 039 00 : 08 : 10

Repeat Playback

Repeat function is available only during playback.
Each time you press [REPEAT], repeat function changes as
example below.
REP OFF (Repeat Off)
REP CHAPTER (Current Chapter Repeat)
REP TITLE (Current Title Repeat)
REP ALL (Entire Disc Repeat)
REP OFF (Repeat Off)
REP 1 ( Current Track Repeat)
REP ALL (Entire Disc Repeat)
REP OFF (Repeat Off)
REP 1 ( Current Track Repeat)
REP DIR ( Current Folder Repeat)
REP ALL (Entire Disc Repeat)

Repeat A-B Playback

Press
point as point A.
2) Press [A-B] at your desired ending point as point B.
3) Press [A-B] to exit the sequence so that "A-B CANCEL"
appears.
• Point B should be in the same title or track as point A.
Note:
• To cancel point A, press [CLEAR] at step 1.
• Repeat A-B playback is not available with some
discs.

Auto Repeat Playback

The unit will automatically rewind the cassette tape when it
has reached the end and will automatically start playback
unless you press [STOP C] or you turn off the unit.
Press first.
V S VHS V V VHS V V VHS VHS VHS
1) In stop mode, press [SETUP].
2) Use [K] or [L] to select "AUTO REPEAT".
3) Press cursor [1] to "AUTO REPEAT" to set "ON".
4) Press [SETUP] to exit.
Note: • The auto repeat can also be set to "ON" or "OFF" by
pressing [REPEAT] on the remote control.
• To cancel auto repeat, follow step 1 above. Then,
press cursor [1] so that "OFF" appears beside
"AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if
you select "AUTO REPEAT" to "ON" in the stop mode.
Press first.
first.
[A-B] at your desired starting
17