To Dial In France And Spain - HP Pavilion N3210 Setup Manual

For example, to force the internal modem to connect with the V.34 modulation:
1. Click Start, Settings, Control Panel.
2. Double-click Modem.
3. Click Properties.
4. Click the Connection tab.
5. Click Advanced.
6. In the "Extra settings" field, type AT+MS=11 and click OK.
Most Windows modem applications use the modulation command in the "Extra settings"
field as part of the modem initialization.
The following table lists the other +MS parameters along with the acceptable values for
each parameter.
Parameter
<automode>
<min_rate>
<max_rate>
To force a maximum rate, set the minimum rate to the same value as the maximum value.

To dial in France and Spain

If you purchased your computer in Spain, the pulse dialing feature is disabled. Because
Loop Disconnect is not certified for your modem in Spain, you should use tone dialing
connections only.
In order to access the MiniTel system in France, you will need the latest modem driver
and MiniTel emulator software. The modem driver is available for download from the
technical support area on the HP notebook Web site (http://www.hp.com/notebooks).
Some HP notebooks include the TimTel Light software; if your computer does not
include TimTel Light, you must purchase the emulator software separately.
Acceptable Values
0 (Automode Disabled)
1 (Automode Enabled)
300 to 33600
300 to 33600
Making Connections
Using Your Modem
Setup Guide 65