StarTech.com USB32DP24K60 Quick Start Manual

Quick-start guide
USB 3.0 to Dual DisplayPort Adapter - 4K 60Hz
USB32DP24K60
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
If you're running Windows 7, macOS 10.10 or
macOS 10.11, you must ensure the latest drivers
from the StarTech.com website are installed before
connecting the USB video adapter to the computer.
If you're running Windows 8 (or later), you can utilize
an internet connection to automatically install the
latest drivers as soon as the USB video adapter is
connected to the computer.
Package contents
1 x USB video adapter
1 x quick-start guide
Requirements
• Two DisplayPort monitors with cabling
• A computer system with:
• An available USB 3.0 port
• Windows® 10, 8.1, 8 or 7
• macOS High Sierra (10.13), Sierra (10.12), El Capitan (10.11),
Yosemite (10.10)
Operating system requirements are subject to change. For the latest
requirements, please visit www.StarTech.com/USB32DP24K60.
Product overview
Integrated USB 3.0
input cable
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/USB32DP24K60
*actual product may vary from photos
DisplayPort
output port #2
DisplayPort
output port #1
Installation
Notes:
• You may need to restart your computer during the software
installation process. Be sure to save any unsaved material before
you install the software.
• If you're running Windows 7, macOS 10.10 or macOS 10.1, ensure
the USB video adapter is not connected to your computer until
after driver installation.
1. If you're running Windows 7, macOS 10.10 or macOS 10.11,
download the latest software from the StarTech.com website:
http://www.StarTech.com/USB32DP24K60
Note: If you're running Windows 8 (or later), or macOS 10.12
(or later) proceed to step 5.
2. The software will be compressed in a .zip folder. Extract the
contents of the folder to a location on your computer that's easy
to access, such as your Desktop or Downloads folder.
3. Open the folder that corresponds with your operating system.
If you're running Windows, launch the Setup (exe) file. If you're
running macOS, launch the DisplayLink Installer (dmg) file.
4. Follow the on-screen prompts to complete the installation, and if
instructed to do so, restart your computer.
5. Connect a DisplayPort cable to each of the adapter's DisplayPort
output ports and to your DisplayPort monitors.
6. Once your computer has restarted, connect the Integrated USB
3.0 input cable to a USB port on your computer.
Important notes:
If connecting multiple USB video adapters or docking stations
to a single computer:
• This USB video adapter uses a DisplayLink family chipset.
If you're connecting this device to a computer along with
additional USB video adapters or docking stations, avoid using
devices with different family chipsets, such as Trigger or Fresco
Logic®.
• To connect multiple USB display adapters to the same
computer, you don't need to install any additional drivers.
Repeat steps 5 through 6 for each video adapter.
• You may be prompted to restart your computer after
connecting each USB video adapter.
Manual Revision: 06/18/2021