MEGA-PIXEL NETWORK CAMERA
Installation Instructions
⑥
Assemble the Junction box top to the Junction box base using a hinge pin.
Hinge can be inserted at either side for convinience.
⑦
Connects the Power/Ethernet cables from camera.
7
⑧
Set Alarm Input Selection Jumper.
( Refer to 'Cover Opening Alarm
and External Alarm Input' on p.9 )
⑨
Cover the Junction box top and
tighten with assembly screws.(4pcs)
* Caution:
If assembly screws are not firmly
assembled, it causes water leakage.
6
Hinge pin
Junction Box Top
13
9