Table of Contents
Advertisement
MEGA-PIXEL NETWORK CAMERA
Installation Instructions
1. Drill four holes for mounting on the ceiling or wall.
2. Place the dome base at the pre-drilled installation position and fix it by using
mounting screws.
3. Route the power & ethernet cable to the connecting place.
4. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
5. Hanging a Dome Cover.
6. Assemble the dome cover to the dome base unit.
CAUTION
• Extreme care should be taken NOT to scratch the lens and the bubble dome
surface while the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
(Insert the safety wire ring on a hook.
-> Fold the hook not to slip off.)
Mounting Screw
09
Plastic Anchor
(6x30mm)
(4x25mm)
Advertisement
Table of Contents
