Table of Contents
Advertisement
Before using for the first time
6 Before using for the
first time
Prepare the appliance for use.
Before using for the first time
6.1 Starting an empty wash-
ing cycle
Your appliance was inspected thor-
oughly before leaving the factory. To
remove any residual water, run the
first wash cycle without any laundry.
Turn the programme selector to .
1.
Close the door.
2.
Pull out the detergent drawer.
3.
Pour standard washing powder
4.
into compartment II.
To prevent foaming, use only half
of the amount of detergent recom-
mended by the detergent manufac-
turer for light soiling. Do not use
detergent suitable for woollens or
delicates.
Push in the detergent drawer.
5.
Press
Inicio/Pausa+Carga
6.
Start/Pause to start the pro-
gramme.
a The display shows the remaining
programme duration.
a After the programme has ended,
the display shows: End(Fin).
Before using for the first time en
Start the first wash cycle or set the
7.
programme selector to
off the appliance.
→ "Basic operation", Page 30
to switch
19
Advertisement
Table of Contents
