Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WNA144VLSN
Summary of Contents for Bosch WNA144VLSN
- Page 1 Washer dryer WNA144VLSN [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 21 1.1 General information.... 4 8 Buttons ........ 24 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Dryness level...... 25 1.4 Safe installation ...... 5 9.1 Changing the dryness level.. 25 1.5 Safe use ........ 6... - Page 3 15 Childproof lock...... 33 15.1 Activating the childproof lock ......... 33 15.2 Deactivating the childproof lock ......... 33 16 Basic settings...... 34 16.1 Overview of the basic set- tings........ 34 16.2 Changing the basic set- tings........ 35 17 Cleaning and servicing .... 35 17.1 Cleaning the drum.... 35 17.2 Cleaning the detergent drawer........ 35...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. -
Page 6: Safe Use
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶... - Page 7 Safety en ▶ If the appliance or the power cord is damaged, immediately un- plug the power cord or switch off the fuse in the fuse box and turn off the water tap. ▶ Call customer services. → Page 50 An ingress of moisture can cause an electric shock. ▶...
- Page 8 en Safety WARNING ‒ Risk of explosion! Highly flammable objects such as lighters or matches may ignite during the drying process. ▶ Remove all highly flammable objects from any pockets in your laundry before the drying process. Unwashed laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when drying is in progress.
-
Page 9: Safe Cleaning And Maintenance
Safety en CAUTION ‒ Risk of scalding! When you wash at high temperatures, the detergent solution gets hot. ▶ Do not touch the hot detergent solution. CAUTION ‒ Risk of chemical burns! If the detergent drawer is opened, detergent and care products may spray out from the appliance. Contact with eyes or skin may cause irritation. - Page 10 en Safety WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents. ▶ Do not use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Ensure that the inner diameter of ▶ 2 Preventing material the water tap is at least 17 mm. Make sure that the length of the damage ▶ thread on the connection to the water tap is at least 10 mm. Follow these instructions to avoid ma- If the water pressure is too high or terial damage and damage to the ap-... -
Page 12: Environmental Protection And Saving Energy
en Environmental protection and saving energy Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the appli- mediately if they come into contact ance afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 13: Installation And Connection
Installation and connection en Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 14 en Installation and connection ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. hoses and power Do not install or operate this appli- ▶ cord between the ance anywhere that is liable to ex- wall and the ap-...
-
Page 15: Connecting The Appliance
Installation and connection en Remove the power cable from the Press down on the 4 cover caps. holder. 4.5 Connecting the appliance Remove the 4 sleeves. Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). -
Page 16: Aligning The Appliance
en Installation and connection When connecting to a 21 mm = ½" Sink Fix and secure tap, first fit the adapter with a seal- the water outlet ing washer. hose with an el- → Page 29. Plastic pipe with Fix and secure rubber sleeve the water outlet hose with an el- → Page 29. -
Page 17: Connecting The Appliance To The Electricity Supply
Installation and connection en To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 51. Check the mains plug is inserted properly. -
Page 18: Detergent Drawer
en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. 5.2 Detergent drawer Maintenance flap for the drain pump → Page 36 Note: Observe the manufacturer's in-... -
Page 19: Control Panel
Familiarising yourself with your appliance en Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 31 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 20: Before Using For The First Time
en first time first time 6 Before using for the first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. -
Page 21: Buttons
Display en 7 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 24 5,0 kg Recommended The maximum load capacity for the selec- load ted programme in kg. -
Page 22: Dryness Level
en Display Display Designation Description Rinse Programme status Spin Programme status End of pro- Programme status gramme Drying Programme status Anti-crease Programme status Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. - Page 23 Display en Display Designation Description ¡ No water pressure. ¡ The water pressure is too low. E:35 / -10 Error Error code, error display, signal. Example...
- Page 24 en Buttons 8 Buttons Button Selection Description (Temperat- – 90 °C Adjust the temperature in °C. ure) - 1400 rpm Adjust the spin speed or deactivate (Spin Speed) the spin cycle. is selected, the water is drained and the spin cycle is deactivated. The laundry stays wet inside the drum.
-
Page 25: Changing The Dryness Level
Dryness level en 9 Dryness level In some programmes, a dryness level is predefined. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. that does not dry readily. Normal, single-layered The laundry is dry. -
Page 26: Programmes
en Programmes 10 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. Max. load load (kg) (kg) Wash Dry- Bomull Wash hard-wearing items made from cotton, linen or blended fabrics. （Cottons） Also suitable as a short programme for nor- mally soiled laundry when you activate Programme setting: ¡... - Page 27 Programmes en Programme Description Max. Max. load load (kg) (kg) Wash Dry- Wash items made from cotton, linen, or syn- thetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡ Max. 1400 rpm Fintvätt/Silke Wash delicate, washable items made from –...
- Page 28 en Programmes Programme Description Max. Max. load load (kg) (kg) Wash Dry- Tip: Use the Syntet programme to wash heav- ily soiled laundry. Programme setting: ¡ Max. 40 °C ¡ Max. 800 rpm Skontorknin Dry items made from synthetic or blended fab- –...
-
Page 29: Accessories
QR code in the table of etc. together or use a laundry bag. contents or on www.bosch- home.com. – Tie together longer drawstrings, and tie cords with solid end- 12.1 Preparing the laundry pieces in hoods or trousers –... -
Page 30: Detergents And Care
¡ You can find further information in 14.2 Setting a programme the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- Turn the programme selector and home.com. set the required programme. ¡ Observe the information on safety → "Programmes", Page 26... -
Page 31: Inserting The Measuring Aid For Liquid Detergent
operation en Ensure that there is no laundry Slide the measuring aid forwards. trapped in the door. 14.5 Inserting the measuring aid for liquid detergent If you order the measuring aid as an accessory, you must use the measur- ing aid. Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. -
Page 32: Starting The Programme
en operation 14.8 Starting the programme 14.10 Adding laundry Requirement: A programme is set. After the programme starts, you can → "Setting a programme", Page 30 remove or add laundry depending on the programme status. Press Requirement: A programme has a The drum rotates and load detec- started. -
Page 33: Cancelling The Drying Programme
Childproof lock en 14.12 Cancelling the drying 15 Childproof lock programme Secure your appliance against being Press ▶ operated unintentionally using the The cooling process starts auto- controls. matically after approx. 30 seconds and cools down the laundry for a 15.1 Activating the childproof few minutes while the drum is ro- lock tating. -
Page 34: Basic Settings
en Basic settings 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 35: Changing The Basic Set- Tings
To keep your appliance working effi- ciently for a long time, it is important to clean and maintain it carefully. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.bosch- home.com. -
Page 36: Cleaning The Drain Pump
en Cleaning and servicing Pull out the insert upwards. Clean the opening for the deter- gent drawer. Clean the detergent drawer and in- sert with water and a brush, and Push in the detergent drawer. then dry them. 17.3 Cleaning the drain pump Clean the drain pump in the event of faults, e.g. - Page 37 Cleaning and servicing en Slide a sufficiently large container CAUTION - Risk of scalding! under the opening. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 38 en Cleaning and servicing Screw the pump cap as far as it Cleaning the drain pump will go. Requirement: The drain pump is empty. → Page 36 Since water may remain in the drain pump, unscrew the pump 90° cap carefully. The handle on the pump cap must be in a vertical position.
-
Page 39: Troubleshooting
Troubleshooting en 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 40 en Troubleshooting Fault Cause and troubleshooting The display goes out Energy-saving mode is active flashes. Press any button. ▶ a The symbol lights up again. "E:36 / -10" Drain pipe or water outlet hose is blocked. Clean the drain pipe and the water outlet hose. ▶...
- Page 41 Troubleshooting en Fault Cause and troubleshooting The tap is turned off. Turn on the tap. ▶ The water inlet hose is kinked or jammed. Ensure that the water inlet hose is not kinked or ▶ jammed. Water level measurement system is defective. Call the after-sales service.
- Page 42 en Troubleshooting Fault Cause and troubleshooting The appliance is not Check the circuit breaker in the fuse box. ▶ working. There has been a power cut. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed ...
- Page 43 Troubleshooting en Fault Cause and troubleshooting The water is not drain- Detergent dosage is too high. ing. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down).
- Page 44 en Troubleshooting Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 16 ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 16 Transit bolts have not been removed. → "Removing the transit bolts", Page 14.
- Page 45 Troubleshooting en Fault Cause and troubleshooting The spin programme Note: Where possible, mix large and small items in does not start. the drum. Different sized items of laundry distribute themselves better during the spin cycle. Start the Centrif. programme. ▶ Loud noises during Appliance is not correctly aligned.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The spin result is not Redistribute the laundry in the drum. ▶ satisfactory. The laun- Note: Where possible, mix large and small items in dry is too wet/too the drum. Different sized items of laundry distribute damp.
- Page 47 Troubleshooting en Fault Cause and troubleshooting The laundry is too After the end of the programme, warm laundry feels damp. damper than it actually is. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable dryness level set.
- Page 48 en Troubleshooting Fault Cause and troubleshooting The programme dura- Foam detection system switches on a rinse cycle if tion changes during foam build-up is too high. the wash cycle. Not a fault – no action required. ▶ Drum jerks after the This is caused by an internal motor test.
-
Page 49: Emergency Release
Page 13 and in the digital instruction manual by → "Starting an empty washing scanning the QR code in the table of cycle", Page 20. contents or on www.bosch- home.com. Turn off the tap. Empty the water inlet hose. Switch off the appliance. -
Page 50: Disposing Of Old Appliance
en Customer Service 19.4 Disposing of old appli- 20 Customer Service ance Function-relevant genuine spare parts Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! -
Page 51: Consumption Values
Consumption values en 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values specified for programmes other than Eco 40-60 are only given as a guide and were determined in accordance with the applicable stand- ards EN60456 and EN62512. - Page 52 en Technical data Maximum load 9,0 kg Mains voltage 220-240 V, 50 Hz Minimum in- stallation protec- tion Nominal power 1900-2300 W Power consump- ¡ Off mode: tion 0,50 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose...
- Page 56 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.