Table of Contents

Advertisement

Washer dryer
WNA144L9SN
en Instruction Manual and Installation Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WNA144L9SN

  • Page 1 Washer dryer WNA144L9SN en Instruction Manual and Installation Instructions...
  • Page 2 Your new washer dryer Display rules : Warning! You have chosen a Bosch washer dryer. This combination of symbol and signal Please take a few minutes to read and word indicates a possibly dangerous become familiar with the advantages of situation.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4: Intended Use

    Intended use Cleaning and maintenance . . . 40 Intended use Appliance housing/control panel . . . 40 Drum ......41 This appliance is intended for private ■...
  • Page 5: Safety Instructions

    Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■...
  • Page 6: Installation

    Safety instructions The appliance must not be Warning ■ supplied through an external Risk of poisoning! switching device, such as a Detergents and care products timer, or connected to a may result in poisoning if circuit that is regularly consumed. switched on and off by a If accidentally swallowed, seek utility.
  • Page 7 Safety instructions The mains cable must not be Warning kinked, crushed or altered, and Risk of injury! must not come into contact with The appliance is very heavy. ■ any heat sources. Lifting it may result in injury. Do not lift the appliance on Warning your own.
  • Page 8: Operation

    Safety instructions If the water hoses are altered Operation ■ or damaged, this may result Warning in material damage or Risk of explosions/fire! damage to the appliance. Laundry that has come into The water hoses must not be contact with solvents, oil, wax, kinked, crushed, altered or wax remover, paint, grease or severed.
  • Page 9 Safety instructions If there is coal dust or flour in Warning Ri s k of expl o si o ns/fi r e! ■ the air around the appliance, Risk of injury! this may cause an explosion. If you support your weight/sit ■...
  • Page 10: Cleaning/Maintenance

    Safety instructions If you pour the wrong Warning ■ quantity of detergent or Eye/skin irritation! cleaning agent into the Detergent and care products appliance, this may result in may spray out if the detergent material damage or damage drawer is opened while the to the appliance.
  • Page 11 Safety instructions Repairs and any other work Caution! ■ on the appliance must only Material damage/damage to be conducted by our the appliance customer service or by an Cleaning agents and agents for electrician. The same applies pretreating laundry (e.g. stain for replacing the mains cable removers, prewash sprays, etc.) (when necessary).
  • Page 12: Environmental Protection

    Environmental protection Reduce the washing temperature for Environmental lightly and normally soiled laundry. protection At low temperatures, the appliance ■ consumes less energy. For light to P ackaging/used appliance normal soiling, lower temperatures E n v i r o n m e n t a l p r o t e c t i o n than indicated on the care label are Dispose of packaging in an also sufficient.
  • Page 13: Positioning And Connecting

    Positioning and connecting Mains lead Positioning and Bag: connecting Installation and operating ■ instructions S tandard accessories Customer Service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the appliance for transport Note:...
  • Page 14: Installation Surface

    Positioning and connecting If the hose and mains cables are not On wooden joist floors, install the Note: ■ routed properly, there is a risk of appliance: tripping and injury. In a corner, if possible, ■ Lay hoses and cables in such a way On a water-resistant wooden board ■...
  • Page 15 Positioning and connecting Keep the screws and sleeves in b) Remove the sleeves. Note: a safe place. Fit the covers. Take the hoses out of the holders. Lock the covers firmly in place by applying pressure to the snap-in hooks. Unscrew and remove all four transport brace screws.
  • Page 16: Removing The Support Struts

    Positioning and connecting Removing the support struts Hose and cable lengths Connection on left side Unscrew and remove all screws in the vertical transport struts. Remove the transport struts. ( ~ 130 cm 0 ~ 150 cm 8 ~ 90 cm @ 60 cm ~ 100 cm Connection on right side Undo and remove the screws on the...
  • Page 17: Water Inlet

    Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Do not immerse the Aqua-Stop safety valve* in water (it contains an electric valve).
  • Page 18: Water Outlet

    Positioning and connecting Open the water tap carefully, Connection checking the leak tightness of the Drainage into a siphon connection points. The screw ■ The connection point must be connection is under mains water secured using a hose clamp with a pressure.
  • Page 19: Alignment

    Positioning and connecting Alignment Electrical connection Level the appliance using a spirit level. Warning Risk of death! Incorrect levelling may result in intense noise, vibrations and "wandering". There is a risk of electric shock if you touch live components. Loosen the lock nuts using a wrench, Never touch or hold the mains plug ■...
  • Page 20: Before Washing For The First Time

    Positioning and connecting Before washing for the first Transportation time e.g. when moving home The appliance was inspected Preparatory work: thoroughly before leaving the factory. To Turn off the water tap. remove any residual test water, run the Reduce the water pressure in the Cotton 90°C programme the first time supply hose.
  • Page 21 Positioning and connecting Insert all four sleeves. Before switching on the appliance again: Notes The support struts must be ■ removed. ~ "Removing the support struts" on page 16 The transport braces must be ■ removed. ~ "Removing the transport locks" on page 14 a) Clip the mains cable securely in Pour approx.
  • Page 22: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance A ppliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Control panel Loading door Service flap...
  • Page 23: Control Panel

    Getting to know the appliance Control panel Programme default settings can be changed. Overview of all programme default settings ~ Page 33 Additional programme settings can be selected. Overview of all additional programme settings ~ Page 34 A (Start/Reload/Pause) button for starting, interrupting, (e.g.
  • Page 24: Display Panel

    Getting to know the appliance Display panel Additional programme settings Programme default settings Display Setting ‰ (Drying Aim) ¾/»/ö Display Setting Description T (Prewash) — - 90° 6 (Temperature) Temperature that p (Easy Iron) can be set in °C ( (Speed Perfect) —...
  • Page 25: Laundry

    Laundry Sorting laundry Laundry Sort your laundry according to the care P reparing laundry for washing instructions and manufacturer's L a u n d r y information on the care labels, depending on: Protecting your laundry and appliance Type of fabric/fibre ■...
  • Page 26: Preparing Laundry For Drying

    Laundry Preparing laundry for drying Starching To ensure an even drying result, Laundry should not be treated Note: Note: sort the laundry according to the: with fabric softener. Type of fabric ■ Switch on the appliance. Care symbols which are indicated on ■...
  • Page 27: Detergents And Care

    Detergents and care products Notes Detergents and care Only use liquid detergents that are ■ products self-flowing Do not mix different liquid detergents ■ Do not mix detergent and fabric Y ou can protect your appliance and ■ softener D e t e r g e n t s a n d c a r e p r o d u c t s your laundry by selecting and using the Do not use products which have correct detergents and care products.
  • Page 28: Overview Of Programmes

    Overview of programmes Overview of programmes S electable programme O v e r v i e w o f p r o g r a m m e s Programme/Type of laundry Options/Information Name of the programme Max. load for washing/ Max.
  • Page 29 Overview of programmes Programme/Type of laundry Options/Information Eco 40-60 9,0 kg/6,0 kg Suitable for washing normally soiled cotton,linen and mixed fabric textiles, and drying it to be immediately stored in a cup- 400 - 1400 rpm board. T (Prewash), p (Easy Iron) Notes Textiles which are washable based on the laundry symbol ‰...
  • Page 30 Overview of programmes Programme/Type of laundry Options/Information Rapid 15'/ Wash & Dry 60' 2,0 kg/1,0 kg For small amount lightly soiled garments made of cotton, — - 40 °C linen, synthetic or blended fabrics. Approx. 15 mins for wash- 400 - 1000 rpm ing.
  • Page 31 Overview of programmes Programme/Type of laundry Options/Information Iron Assist î -/1,0 kg Odor removal and wrinkle reduction program, suitable for wool, linen, suits, etc. which do not need frequent washing. Notes It is recommended to hang the clothing in a ventilated ■...
  • Page 32: Drying Table

    Overview of programmes Drying table Estimated drying time (min) Recommended drying programme Drying load ö » ¾ (kg) (IronDry) (CupboardDry) (Cupboard- Dry+) 1.0-2.0 45-60 50-80 65-100 Intensive Dry 2.0-4.0 60-90 80-140 100-160 4.0-6.0 90-140 140-200 160-270 0.5-1.5 35-45 50-70 65-100 Gentle Dry 1.5-2.5 45-55...
  • Page 33: Programme Default Settings

    Programme default settings ñ (Finish in/Time Dry) Programme default Before starting the programme, you settings can preselect the programme end ("Finish in" time) in 0.5h (h = hour) Y ou can change the default settings for increments (between “minimum P r o g r a m m e d e f a u l t s e t t i n g s selected programmes.
  • Page 34: Additional Programme

    Additional programme settings Notes Additional programme Do not exceed the maximum loads ■ settings for drying. Overview of programmes ~ "Selectable programme" You can find possible additional N ote: on page 28 A d d i t i o n a l p r o g r a m m e s e t t i n g s programme settings in the overview;...
  • Page 35: Operating The Appliance

    Operating the appliance Select programme/switch on Operating the the appliance appliance If you have activated the Note: P reparing the appliance childproof lock, you must first deactivate O p e r a t i n g t h e a p p l i a n c e it before you can set a programme.
  • Page 36: Dosing And Adding Detergent And Care Products

    Operating the appliance Notes Filling the dispensers Unfold and load presorted items ■ Pull out the detergent drawer. of laundry. Mix large and small items. Washing items of different Warning size distribute themselves better Eye / skin irritation! during the spin cycle. Individual If the detergent drawer is opened items of washing may cause while the appliance is running,...
  • Page 37: Starting The Programme

    Operating the appliance Starting the programme Measuring aid A* for liquid detergent *depending on the model Touch and hold A (Start/Reload/ Pause) button for 1~2 seconds, then Position the measuring aid A for release the button. The programme measuring the correct amount of liquid starts and the appliance door is locked.
  • Page 38: Adding/Removing Laundry

    Operating the appliance Adding/removing laundry Cancel the programme After starting the programme (only for For programmes washing at high washing), you can add or remove temperatures: laundry if necessary. Touch the A (Start/Reload/Pause) button. Touch the A (Start/Reload/Pause) To cool down laundry: Select Rinse. button.
  • Page 39: Removing Laundry/Switching Off The Appliance

    Appliance settings If you do not take laundry out within ■ Appliance settings 15 mins after drying process finished, wrinkle guard process will Y ou can change the following settings: start to prevent laundry getting A p p l i a n c e s e t t i n g s wrinkled.
  • Page 40: Sensors

    Sensors 4: Switching the drum care ■ Cleaning and information signal on/off. maintenance Ž Œ off Warning C l e a n i n g a n d m a i n t e n a n c e Risk of death! Exiting setting mode There is a risk of electric shock if touch You can now end the process and set...
  • Page 41: Drum

    Cleaning and maintenance Drum Emptying the detergent draw, cleaning the detergent drawer Warning and its housing Risk of injury/material damage/ damage to the appliance! If the appliance contains detergent or Permanently washing at low fabric softener residues: temperatures and a lack of ventilation Pull out the detergent drawer.
  • Page 42: Drain Pump Is Blocked

    Cleaning and maintenance Clean the detergent dispenser tray Drain pump is blocked and insert with water and a brush, and dry it. Clean the inside of the Turn the water tap off to prevent Note: housing as well. more water from flowing in and to ensure that it is drained via the pump.
  • Page 43: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump cover thread and pump housing. The Turn the programme selector to impeller in the drain pump must be Av (Off).
  • Page 44: Faults And What To Do About Them

    Faults and what to do about them Clean the filters: Faults and what to do Disconnect the hose from the rear of about them the appliance. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m E.g.
  • Page 45: Information On The Display Panel

    Faults and what to do about them Drain the water. ~ Page 42 Pull the emergency release downwards with a tool and release. The door can then be opened. Information on the display panel Display Cause/Remedy Flashes fast + signal: The door was opened and the water level is too high. Õ...
  • Page 46: Faults And What To Do About Them

    Faults and what to do about them Display Cause/Remedy E:35 There is water in the base trough, the appliance is leaking. Turn off the tap. Call alternating with customer services. -10 (Suitable for spe- cial models) H:95 No water detected in drying phase, may get bad drying result. alternating with ~ "Filter in the water supply is blocked"...
  • Page 47 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched the A (Start/Reload/Pause) button or selected ■ start. ñ (Finish in/Time Dry)? Is the door closed? ■ Childproof lock activated? Deactivate childproof lock. ■ Shop mode activated? If the display shows à•‹...
  • Page 48 Faults and what to do about them Faults Cause/Remedy Detergent/fabric softener There is too much detergent/fabric softener in the dispensers. Do not fill the drips off the seal and col- dispensers above the max. mark. lects on the door or in the seal fold.
  • Page 49 Faults and what to do about them Faults Cause/Remedy Drying duration extended. Run the Cotton — (cold) programme to remove fluff which has collected in ■ the washer drum during the drying phase. If the ambient temperature is higher than 30 °C, this may extend the drying ■...
  • Page 50: Customer Service

    Customer Service If you contact Customer Service, you Customer Service will require the product number (E-Nr.) and the production number (FD) of your I f you have any queries on use, are appliance. C u s t o m e r S e r v i c e unable to rectify faults on the appliance The contact details for Customer yourself or if your appliance needs to be...
  • Page 51: Consumption Values

    Consumption values Consumption values T he following information is provided in accordance with the EU-Ecodesign- C o n s u m p t i o n v a l u e s Regulation. The values given for programs other than the Eco 40-60 are indicative only and were determined in accordance with the applicable standard EN60456 and EN62512.
  • Page 52: Technical Data

    Technical data Technical data Aqua-Stop warranty D imensions: O nly for appliances with Aqua-Stop T e c h n i c a l d a t a A q u a - S t o p w a r r a n t y 84,8 cm x 59,8 cm x 59,0 cm In addition to warranty claims against (height x width x depth)
  • Page 56 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

Table of Contents