Page 1
NFI29CB LED MONITOR USER MANUAL In order to continue serving our customers and providing the best products, our product information including our user manuals may receive updates from time to time. Please check our website for the latest user manuals and product materials.
® VIOTEK shall not be held responsible for injury or damage of products or persons due to failure to adhere to the aforementioned precautions or any others noted hereafter.
Section 3: Product Overview 3.1 – Monitor Buttons Rocker Button Actions Description Rocker Up Gameplus timer shortcut key Rocker Down Gameplus crosshair shortcut key Rocker Left Display mode menu shortcut key Rocker Right Signal source selection menu shortcut key Press Rocker Press and hold for ~6s to turn on or off the monitor.
3.2 – Monitor Ports Power Connector: Insert the power cable to supply power to the monitor. HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port. DP Connector: Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.
Page 8
3. Remove the foam covering the back of the monitor. Locate the two top slots of the opening on the back of monitor. Insert the mounting plate into the two top slots. Continue to press in until it clicks into place to make sure the stand is installed in place.
Section 5: Mount Installation 1. Open the package and take out the product with foam still attached. Gently place it on a desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor is already attached to the stand, remove the stand. Button 2.
GPUs that use AMD® FreeSync™ or NVIDIA® G-Sync™. The feature is off on VIOTEK monitors by default and must be manually enabled in the monitor’s OSD (see Section 8: OSD). To use this feature, the connecting device must be compatible with adaptive sync (FreeSync and/or G-Sync);...
Section 7: Indicator Light Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video source, no horizontal or vertical signal has been detected or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected.
8.1 – OSD Menu Functions Main Menu Sub-Menu Options Description Adjust the overall lightness or Brightness 0~100 darkness of the entire image Adjust the degree of difference Contrast 0~100 between dark and bright areas of the image Turn on dynamic contrast ratio (DCR) function which automatically Picture adjusts image brightness based on...
Main Menu Sub-Menu Options Description GAME TIME Full Screen, Display Size Set aspect ratio Auto, 4:3 Set the filter to reduce harmful blue Off, Weak, Low Blue Strong light emitted from the display Turn on/off the function that GAME CURSOR Over Driver On, Off enhances the monitor’s response...
4. Push the Rocker button UP to set the GAME TIME. GAME TIME 10:00 20:00 30:00 40:00 50:00 60:00 90:00 Section 10: Troubleshooting GAME CURSOR The screen is blank • Press the power button to turn on the monitor. • Confirm the brightness and contrast settings are set normally. •...
Dim image • Adjust the brightness and contrast ratio. Image jitter/moire pattern • Nearby electric equipment may interfere with the monitor. Light indicator is on or flashing, but there is no image displayed on screen • Check that the monitor power is on. •...
Section 12: Specifications Item Detail Model Number NFI29CB Screen Size 29’’ Display Type Viewing Angle H178° / V178° Aspect Ratio 21:9 Resolution 2560 x 1080p Backlight E-LED Power on: Blue (solid); Power saving: Blue (flashing) LED Indicator Typical Brightness 300 cd/m² (max.) Default Color Temp.
Warranty services are provided by Viotek Warranty Pro (“WP”). If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, WP will: (1) repair the hardware defect by using new or refurbished parts that are equivalent to new in performance and reliability;...
Page 18
DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RELATED INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the NFI29CB and is the answer not in the manual?
Questions and answers