Opengear CM4132 Quick Start Manual

Thank you for purchasing the CM4116/32/48 console server. This Quick Start walks you
through installation, configuration and local operation. For more details please refer to
User Manual
the
Step1
CM4116/32/48
Console server
Step 2
Power the CM4116/32/48 console server. The –SAC models have a universal AC

power supply built in, that plug into the mains. The –SDC models have a DC
supply and an external screw connector block for connecting to the DC power
sources
Connect the LAN port on the console server to your network, connect your serial

devices to the console server
Note: If you plan to use out-of-band (OoB) dial-in access, connect an external
modem to the LOCAL serial port.
Step 3
The default console server IP Address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 into the address bar

CM4116, CM4132 & CM4148 Quick Start (520004-Rev 3.5)
CM4116, CM4132 & CM4148
on the CDROM.
Check kit contents
UTP cables (2) and
DB9F-RJ45S straight
and cross-over
Connect the hardware
Set up the console server
Quick Start Guide
SERIAL
ports 1 through 16/32/48
192.168.0.1
(subnet mask
Quick Start & Power cable
CDROM (-SAC models only)
255.255.255.0
).
Page 1