Opengear cm4008 Quick Start Manual

Advertisement

Thank you for purchasing the CM4008 console server. This Quick Start walks you through
installation, configuration and local operation. For more details please refer to the
Manual
on the CDROM.
Step1
CM4008
console server
Step 2
Plug the power supply into the AC mains and connect the DC power cable to the
5VDC
Connect the CM4008
devices to the CM4008 serial
Note:
If you plan to use out-of-band (OoB) dial-in access, connect an external
modem to the
Step 3
The default console server IP address is
With a web browser on any computer that is LAN connected to the console server:
Enter https://192.168.0.1 into the address bar
CM4008 Quick Start (520005-Rev 3.2)

Check kit contents

UTP cables (2) and DB9F-RJ45S
straight and cross-over

Connect the hardware

power socket on the CM4008
LAN
LOCAL
port.

Set up the console server

Quick Start Guide

port to your network, connect your serial console
PORTS
1-8.
192.168.0.1
CM4008
Quick Start &
5VDC IEC power
CDROM
supply and cable
255.255.255.0
(subnet mask
User
).
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the cm4008 and is the answer not in the manual?

Questions and answers

Summary of Contents for Opengear cm4008

  • Page 1: Quick Start Guide

    CM4008 Quick Start Guide Thank you for purchasing the CM4008 console server. This Quick Start walks you through User installation, configuration and local operation. For more details please refer to the Manual on the CDROM. Step1 Check kit contents CM4008 UTP cables (2) and DB9F-RJ45S Quick Start &...
  • Page 2 Flow Control) to match those of the device being controlled Select the Console Server protocols (Telnet, SSH, TCP and RFC2217) that are  to be used for the data connection to that port CM4008 Quick Start (520005-Rev 3.2) Page 2...
  • Page 3 Management Console, check the admin Group – by default the user is granted no Management Console access. Click Apply Please register your product to activate the warranty and to automatically receive advice of future firmware updates. Go to: http://opengear.com/product-registration.html CM4008 Quick Start (520005-Rev 3.2) Page 3...
  • Page 4 COM/tty port applications on your Windows PC, Linux server or virtual machine to the Quick serial devices attached to the console server. Refer to the provided Starts for details CM4008 Quick Start (520005-Rev 3.2) Page 4...

Table of Contents