To Change The Boot Device - HP OmniBook XE4400 User Manual

Basic Operation
Operating Your Computer

To change the boot device

The computer normally boots from its internal hard disk. You can also boot the computer
from a floppy disk drive, a CD-ROM drive, or an internal network interface card.
1. Click Start, Turn Off Computer (or Shut Down), Restart.
2. When the HP logo appears, press ESC to display the Boot menu.
3. Use the arrow keys to select the boot device, and press ENTER.
If you want to boot from a specific device whenever it is present, change the boot order
using the BIOS Setup utility—see "To run the BIOS Setup utility" on page 144.
30 Corporate Evaluator's Guide