HP OmniBook XE4400 User Manual page 171

S-Registers (Conexant)
Register Function (Conexant)
S0 Number of rings to auto-answer.
S1 Ring counter.
S2 Escape character.
S3 Line termination character.
S4 Response formatting character.
S5 Command line editing character.
S6 Wait time for dial tone.
S7 Wait time for carrier.
S8 Pause time for dial delay modifier.
S10 Carrier loss disconnect time.
S11 DTMF tone duration.
S12 Escape prompt delay.
S18 Test timer.
S29 Flash dial modifier time.
S30 Disconnect inactivity timer.
S46 Data compression control.
S95 Extended result code messages control.
Selected Result Codes (Conexant)
Code Meaning
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5 CONNECT 1200
6 NO DIAL TONE
7 BUSY
8 NO ANSWER
24 DELAYED
32 BLACKLISTED
33 FAX
35 DATA
83 LINE IN USE
Reference Information
Modem Reference Information
Range/units Default
0–255/rings 0
0–255/rings 0
0–255/ASCII 43
0–127/ASCII 13
0–127/ASCII 10 (line feed)
0–32/ASCII 8 (backspace)
2–255/sec 2
1–255/sec 50
0–255/sec 2
1–255/.1 sec 14 (1.4 sec)
50–255/.001 sec 95 (95 msec)
0–255/.02 sec 50 (1 sec)
0–255/sec 0
0–255/10 msec 70 (700 msec)
0–255/10 sec 0
136 (error correction 138
w/o compression) or
138 (error correction &
compression)
0
Corporate Evaluator's Guide 171