To Install A 3Com 3C575 Fast Etherlink Xl Cardbus Pc Card5-13 - HP OmniBook XE2 Evaluator Manual

To install a 3Com 3C575 Fast EtherLink XL
CardBus PC Card
Requirements
OmniBook XE2 with Windows 95 installed.
3Com 3C575 Fast EtherLink XL CardBus PC Card.
3Com 3C575 Fast EtherLink XL CardBus PC Card Driver Disk.
1. Insert the floppy drive and restart the OmniBook.
2. While Windows 95 is running, insert the PC Card.
The New Hardware Found window is displayed.
3. Insert the 3Com driver disk, then click Next.
4. Click Finish to install the driver.
5. Even though the 3Com driver disk is still in the A: drive, Windows will
prompt you to insert the driver disk. Click OK.
6. Type A:\ when the path dialog box appears, then click OK.
7. If asked for the path to the Windows 95 cab files, enter the path
C:\WINDOWS\OPTIONS\CABS. Press Enter.
8. From Control Panel, double-click Network, then click Identification.
9. Enter your computer name, workgroup and description.
10. If necessary, click the Configuration tab and add new protocols.
11. Click OK to close the Network Properties window.
12. Click Yes to restart the OmniBook.
Your 3Com 3C575 Fast EtherLink XL CardBus PC Card is now ready for
use.
Using Windows 95
Installing Cards
5-13