To Install Service Pack 5.0 For Retail Windows Nt 4.0 - HP OmniBook XE2 Evaluator Manual

22. Choose No, do not create an emergency repair disk, then click Next.
It is more useful to create a repair disk after installation is complete and after
Important
you have installed your drivers and other applications.
23. Choose Install the most common components, then click Next.
24. Click Next to Install Windows NT Networking.
25. Choose Do not connect the computer to a network at this time, then click
We recommend that you install Windows NT networking after Windows NT is
Important
fully installed. Follow the instructions in the application note for the network
card you are using. The application notes are available from our website. A few
sample application notes are also included at the end of this chapter.
26. Click Finish to finish setting up Windows NT.
27. Enter the correct Time Zone and Date and Time, then click Close.
28. Click OK twice to accept the VGA-Compatible Display Adapter (The
29. When prompted, click Restart Computer.

To install Service Pack 5.0 for retail Windows NT 4.0

If you've installed a retail version of Windows NT 4.0, you'll need to install
Service Pack 5.0. This is located on the Microsoft website at
http://www.microsoft.com/ntserver/nts/downloads/recommended/sp5/allsp5.asp
.
1. Insert a CD that contains the service pack in the CD-ROM drive.
2. From the Start menu, click Run.
3. Browse to SP5I386.EXE on the CD.
4. Select Accept the Software License Agreement.
5. Select No, I do not want to create an Uninstall directory then click Install.
6. When prompted, click OK to reboot.
Next.
video driver will be installed in the next section.)
Using Windows NT 4.0
Installing Retail Windows NT 4.0
7-5