Operating Your Wine Cooler - Vinotemp EL-168ZZ-S Owner's Manual

INSTALLING THE STAINLESS STEEL HANDLE
This cooler includes a stainless steel handle that is not required to operate this unit. To install
wine
the handle please follow the below instructions:
① Pull away the door gasket in the area where the handle is to
be installed. You can see two designated holes for handle
installation. The gasket is easily displaced by hand, no tools
② Install the handle tightly as shown below with the two
are necessary.
screws, lock washers and flat washers provided. (DO NOT
over tighten as this will cause damage to the handle assembly
③ Replace the door gasket to its original position.
and stainless steel surface of the glass door).

OPERATING YOUR WINE COOLER

OPERATING YOUR WINE
Red LED indication of the selected temperature range.
H
(temperatures between 15 ° C and 20 ° C or 59 ° F and 68 ° F)
White LED indication of the selected temperature range.
I
(Temperatures between 9 ° C and 14 ° C or 48 ° F and 58 ° F)
Yellow LED indication of the selected temperature range.
J
(Temperatures between 5 ° C and 8 ° C or 40 ° F and 47 ° F)
Press the button to turn on/off the light, lighting switches off automatically after 10 minutes.
K
10