Related Manuals for Vinotemp Element EL-BF23F
Summary of Contents for Vinotemp Element EL-BF23F
- Page 1 EL-BF23F ULTRA COOL 23° BEER AND BEVERAGE COOLER DOWN A PROUD HERITAGE OF EXPERIENCE & QUALITY 732 South Racetrack Road, Henderson, NV 8 9015 | 1.800.777.8466 | info@vinotemp.com | www.vinotemp.com...
- Page 2 YOUR BEVERAGE COOLER This unit can be used for storage and/or service. The unit has a glass door and soft interior light that you can use to display your beverages or even wine. SERVING BEVERAGES Storing beverages at the proper temperature is important. To preserve them as long as possible beverages should be stored at approximately 39°...
- Page 3 Completing this product registration is the only way to guarantee you will be notified of substantive issues that arise concerning your product. Become a Member of the Vinotemp® Family Complete this product registration with your e-mail address and receive special offers and updates on new products via e-mail.
- Page 4 Add a New Leaf extended warranty to your order, and have the security of knowing that if there should be a problem, even years in the future, New Leaf will be there to assist! Usable for any Wine Cellar or other electronic device manufactured by Vinotemp. Add this warranty to purchases made from vinotemp.com or other qualified venders.
-
Page 5: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ..............6 ELECTRICAL CONNECTION..................7 PARTS AND SPECIFICATIONS ................. 8 INSTALLATION ......................9 OPERATING YOUR WINE COOLER ..............10-11 CARE AND MAINTENANCE ................12 TROUBLESHOOTING ..................13-14 TERMS OF SALE AND WARRANTY ................ 15 SERVICE &... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Do not operate this or any other appliance with a damaged cord. • Do not operate if housing is removed or damaged. • Exercise caution and use reasonable supervision when appliance is used near children. Never allow children to operate, play with or crawl inside the appliance. -
Page 7: Electrical Connection
ELECTRICAL CONNECTION For your protection, this unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding- type outlet. • Do not under any circumstances cut or remove the third ground prong from the power cord supplied. -
Page 8: Parts And Specifications
PARTS AND SPECIFICATIONS Model EL-BF23F Zone Type 1 Temp. Zone Cooler Capacity Approx. 80 cans Volume 83 L Rated Voltage 115V AC Rated Frequency 60Hz Rated Power Control Temp Range 23-65°F (-5-18°C) Cooling System, Refrigerant Compressor, R600a/0.63Oz Climate Category SN/ST Net Weight 79.37 lbs. -
Page 9: Installation
INSTALLATION Remove all packing material before using your beverage cooler. Check to be sure you have all of the parts and an owner’s manual. IMPORTANT: Before connecting the unit to a power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. - Page 10 OPERATING YOUR BEVERAGE COOLER OPERATING INSTRUCTIONS 1. Gently place/slide the racks into the beverage cooler. 2. Determine the best temperature setting to use. 3. Place beverage cans inside the beverage cooler. 4. Plug the power cord into a standard grounded electrical outlet. 5.
- Page 11 UP: Press to raise (warm) the set temperature by 1°C or 1°F. Temperature Display: LED display shows the current temperature inside this unit. DOWN: Press to lower (cool) the set temperature by 1°C or 1°F. TEMP: Press this temperature setting button to display the flashing. Adjust the temperature by pressing the UP or DOWN button.
-
Page 12: Care And Maintenance
PROBLEMS WITH YOUR BEVERAGE COOLER You can solve many common wine cellar problems easily, saving you the cost of a possible service call. Try the suggestion below to see if you can solve the problem before contacting Vinotemp at Info@Vinotemp.com. TROUBLESHOOTING... - Page 13 Problem Possible Causes Solutions • • Not plugged in Plug the unit. • • Chiller does not The appliance is turned off. Turn the unit on. • • operate. Low voltage Ensure voltage is normal. • • Fuse broken Change fuse. •...
- Page 14 All defective return exchanges require a Return Authorization Number (RA) assigned by Vinotemp. Any unauthorized defective return to Vinotemp will be rejected at the time of attempted delivery. Return freight costs for defective product is covered by Vinotemp within the...
- Page 15 Purchaser responsible for any/all boxes, packaging materials, etc., to ensure return product is packaged correctly and fit for transit. Vinotemp is not liable for damages resulting from improper packaging or shipper mishandling. Vinotemp is authorized to reject any authorized defective returned product that arrives damaged.
- Page 16 If you use a service repair company without approval or parts not supplied by Vinotemp and your unit under warranty fails to work, we will repair your item provided you ship your unit prepaid to and from our facility in Henderson. Vinotemp is not responsible for install or removal costs or unauthorized repairs.
- Page 17 the goods are defective and goods are found to be in working condition by the Seller, Purchaser is liable for the cost of freight both ways plus and a service fee that is 35% of the purchase price of the goods. Built to Order and Custom products are nonreturnable, nonrefundable. Purchaser must notify Seller of nonconforming goods within 48 hours of receipt, after which time all goods are deemed accepted by the Purchaser.
- Page 18 30 day period once they have been notified by Vinotemp through phone call, email, or letter that their unit is ready for pick up. If the item remains in the Vinotemp warehouse after 30 days but no longer than 60 days, the Purchaser will incur additional storage fees of 2%. After 60 days in storage, the item will become property of Vinotemp.
- Page 19 1. Freight: Vinotemp is not a freight, moving or installation company, if Freight is arranged for the Buyer, the Seller assumes no responsibility for the goods sold to the Purchaser once the goods have left the Seller’s...
- Page 20 Improper placement of the unit will void the warranty. By Vinotemp in writing, any 3rd party repair facility must be pre- approved before providing parts free of charge.
-
Page 21: Service & Important Notice
The manufacturer has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. WARNING: Please do not place the unit within reach of children. For adult use only. Contact info@vinotemp.com with any questions or visit www.vinotemp.com... - Page 22 Vinotemp is a registered trademark of Vinotemp International. All products, features, and services are subject to change without notice. We cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.