Operating Instructions - Westinghouse WSFS1601GD Instruction Manual

OPERATING INSTRUCTIONS

1. Place the fan upright on a dry, level and stable surface.
2. To adjust the vertical tilt, hold the fan head (3) with one hand
and, with the other hand, slowly turn the tilt-adjustment knob
(4) anti-clockwise to loosen it. Push the fan head (3) up/down
to adjust the tilt to your desired angle (70⁰ tilt), and tighten the
tilt-adjustment knob (4).
3. To adjust the fan height, hold the extension pole (5) firmly
with one hand and carefully loosen the height adjustment
knob (6) anti-clockwise with the other. Adjust the fan to your
desired height (adjustable from 34.5" – 48.5"), and tighten the
height adjustment knob (6) clockwise. Do not over extend the
extension pole (5).
4. Turn the Control knob (10) to the "O" (Off) position, and plug
the appliance into a suitable wall socket.
5. Turn the Control knob (10) to the desired speed setting.
I = Low speed
II = Medium speed
III = High speed
6. To start the automatic left-right oscillation, press the oscillation
knob (9). To stop the automatic left-right oscillation, pull the
oscillation knob (9).
7. Once you have finished using the fan, turn the Control knob
(10) to the "O" (Off) position, and unplug the fan from the wall
socket.
IMPORTANT: Always unplug the appliance from the wall socket
after use to disconnect it completely from the power supply.
WARNING! Never adjust the tilt or height of the fan while the
appliance is on.
EN
11