SETTING UP THE REMOTE CONTROL
Pull the plastic film from the battery compartment.
Operating the remote control: Point the remote control at the
infrared sensor making sure there are no obstacles. The remote
control range is 5 meters (16.40 feet).
CHANGING THE BATTERY
1.
Push the release button inwards and pull the battery casing
out. Remove the old battery.
Remove
control
2. Insert 1 x CR2025 3V battery ensuring you follow the polarity
(+ and -) marked on the casing.
3. Slide the battery casing back into the remote control until you
hear it click into place.
WARNING: Do not expose the infrared sensor to direct sunlight or
other strong light, such as a florescent light.
OPERATING INSTRUCTIONS
NOTE: The remote control buttons are the same as the control
panel buttons.
1.
Place the fan on a dry, level and stable surface.
2. Insert the plug into a 120 V AC / 60 Hz outlet. The power
indicator light will turn on.
3. Press the POWER button to turn on the fan. For a few seconds
the fan will be at medium speed and then it will change to low
speed.
WSFTBGY32_Tower Fan_2L.indd 11
WSFTBGY32_Tower Fan_2L.indd 11
HOW TO USE
Battery cover
PULL
PUSH
Battery
11/2/2021 1:10:49 PM
11/2/2021 1:10:49 PM
EN
11