Operating Instructions - Westinghouse WSFDAN1201SV Instruction Manual

WARNING!
• The metal fan blades have sharp edges. Handle with care.
• Before using the appliance, always ensure that all parts of the
appliance are properly assembled to avoid a hazard.

OPERATING INSTRUCTIONS

WARNING! Never adjust the tilt of the fan while the appliance is
on.
1. Place the fan on a dry, level and stable surface.
2. To adjust the vertical tilt, hold the fan head (1) with one hand
and, with the other hand, slowly turn the tilt adjustment knob
(7) anti-clockwise to loosen it. Push the fan head (1) up or down
to adjust the tilt to your desired angle (70⁰ tilt), and tighten the
tilt adjustment knob (7).
3. Make sure that the Control knob (9) is in the "O" (Off) position,
and plug the appliance into a suitable wall socket.
4. Turn the Control knob (9) to the desired speed setting.
I = Low speed
II = Medium speed
III = High speed
5. To start the automatic left-right oscillation, press the oscillation
knob (8). To stop the automatic left-right oscillation, pull the
oscillation knob.
6. Once you have finished using the fan, turn the Control knob
(9) to the "O" (Off) position, and unplug the fan from the wall
socket.
IMPORTANT: Always unplug the appliance from the wall socket
after use to disconnect it completely from the power supply.
EN
10
HOW TO USE