Operating Instructions - Westinghouse WSFTE3214 Instruction Manual

IMPORTANT: Make sure that the power cord passes through the
guides on the rear half of the base.
SETTING UP THE REMOTE CONTROL
Pull the plastic film from the battery compartment.
Operating the remote control: Point the remote control at the
infrared sensor making sure there are no obstacles. The remote
control range is 16.4 feet.
CHANGING THE BATTERY
1. Push the release button inwards and pull the battery casing
out. Remove the old battery.
2. Insert 1 x CR2025 3V battery ensuring you follow the polarity (+
and -) marked on the casing.
3. Slide the battery casing back into the remote control until you
hear it click into place.
WARNING: Do not expose the infrared sensor to direct sunlight or
other strong light, such as a florescent light.

OPERATING INSTRUCTIONS

NOTE: The remote control buttons are the same as the control
panel buttons.
1. Place the fan on a dry, level and stable surface.
2. Insert the plug into a 120 V AC / 60 Hz outlet. A beep will
sound.
3. Press the POWER button to turn on the fan. The fan will turn on
in low speed.
4. Press the SPEED button repeatedly to select the fan speed. The
indicator light will turn on below the selected speed level icon:
Icon/Indicator light
EN
10
WSFTE3214_Tower Fan_2L_V2.indd 10 WSFTE3214_Tower Fan_2L_V2.indd 10
HOW TO USE
Speed level
Low
Medium
High
10/3/2022 10:25:13 AM 10/3/2022 10:25:13 AM