Toshiba RAS-B05E2KVG-E Service Manual page 116

No. Part name
Type A: please make sure for fixing screw on
motor cover locking with heat exchanger.
Procedures
<To re-installation>
In case of evaporator is assembled with
evaporator hins seal :
- Put the evaporator hins seal on the body back
before assembly the heat exchanger.
- Please keep assembly heat exchanger
follow figure as below :
Heat exchanger
Cross flow fan
Type : A (For 05,07,10,13k)
Heat exchanger
Type B: please make sure that the hook of
motor cover must be installed into the locking
slot of heat exchanger.
Type : B (For 16,18k)
Heat exchanger
Evaporator hins seal
Motor cover
Screw
Motor cover
Locking slot
Hook
- 116 -
Remarks