Toshiba RAS-B05E2KVG-E Service Manual page 111

No. Part name
5
Horizontal louver
6
Fan motor
<To re-installation>
- Check the type name of fan motor.
- Keep connector position and arrange fan
Procedures
1) Remove shaft of the horizontal louver
from drain pan.
Type A: Push 1 the center arm then
remove the other shafts.
Type B: Push 2 the center arm then
remove the other shafts.
1) Follow the procedure item 3 and 4 .
2) Loosen the set screw of the cross flow fan.
Cross ow fan Body back
5.0 mm
Set screw Fan motor
Type : A (For 05,07,10,13k)
3) Remove 2 fixing screws of the motor band.
4) Pull the motor band and the fan motor
outward.
motor wires follow figure.
Fan motor wire
Type : A (For 05,07,10,13k)
Cross ow fan Body back
3.5 mm
Set screw Fan motor
Type : B (For 16,18k)
Screws
Fan motor
connector
- 111 -
Remarks
Horizontal louver
Type : B (For 16,18k)
Horizontal louver
Cross ow fan
Hexagon screw driver
Vertical louver
Fan motor
Drain pan
Motor band