Toshiba RAS-B05E2KVG-E Service Manual page 112

No. Part name
7 Drain pan
1) Follow the procedure item 3 .
assembly
2) Remove screw holding the electric part cover.
5) Condition to remove drain pan.
Type : A (For 05,07,10,13k)
Procedures
P.C.board
Louver motor
connector
3) Disconnect the louver motor connector (5P)
from P.C. board assembly.
4) Remove fixing screws of the unit display
and remove unit display.
Type : A (For 05,07,10,13k)
Screw
Type : B (For 16,18k)
Type A: Remove 2 fixing screws of the drain pan
Type B: Can be remove from body back
<To re-installation>
- Press the drain pan into the back body
- Please make sure ribs of drain pan in left
and right side must be install to lock position.
- Press the center arm of drain pan to back
body.
Back body
Drain pan
Back body
Center arm
of drain pan
Screw
Louver motor
connector
Louver motor
connector
Drain pan
- 112 -
Remarks
Screw
Electric part cover
Unit display
Back body
Rib of drain pan
Drain pan
Connectors
Screw