Installing The Drivers - StarTech.com PCISATA2A133 Instruction Manual

Installing the Drivers

Once you have connected your Slot Saver card, the next time you turn on your computer
Windows will automatically detect that you have installed new hardware. Insert the
installation disk in your floppy drive, and follow the instructions below to install the
required software drivers. Note that you may need a Windows OEM CD to complete the
installation of some of the card components, depending on your Windows installation.
This may not be the same as a "Recovery CD" that is included by some manufacturers.
Contact your computer manufacturer if you need an original Windows installation CD.
Windows 98SE/ME
1. On startup, Windows will detect that new hardware has been installed (PCI standard
PCI-to-PCI bridge) and launch the Add New Hardware Wizard. Click Next and
choose the Search for the best driver for your device (Recommended) option.
Click Next.
2. Uncheck all boxes on this screen and click Next.
3. The Wizard will inform you that "Windows is now ready to install the best driver for
this device..." Click Next
4. Windows will detect PCI Mass Storage Controller and launch the Add New
Hardware Wizard. Click Next and choose the Search for the best driver for your
device (Recommended) option. Click Next.
5. On the next screen select only Specify a location. Choose Browse.
6. In the file selection box, double click 3
7. The file location box under Specify a location will now contain the path to the files.
Click Next.
8. The Wizard will inform you that "Windows is now ready to install the best driver for
this device..." Click Next. The Wizard will complete the installation. Click
Finish.
9. Windows will detect that additional new hardware has been installed (NEC
Firewarden OHCI Compliant IEEE 1394 Host Controller) and launch the Add New
Hardware Wizard. Click Next.
10. Choose the Search for the best driver for your device (Recommended) option.
Click Next.
11. Uncheck all boxes on this screen and click Next.
12. Windows will find more than one possible driver for the device. Under "What do you
want to install?" choose The Updated Driver (Recommended) and click Next.
13. The Wizard will inform you that "Windows is now ready to install the best driver for
this device..." Click Next
in your CD-ROM or other optical drive The Wizard will complete the installation.
Click Finish.
14. Windows will detect all remaining new hardware and install the drivers without
intervention.
Instruction Manual
. . The Wizard will complete the installation. Click Finish.
Floppy (A:). Click OK.
1/2
. . If prompted, insert the Windows installation CD
3