Gpus - Supermicro SuperServer SYS-610U-TNR User Manual

6.6 GPUs

Supermicro 1U Ultra systems support graphic processing units (GPUs) when installed with
some additional optional parts. Refer to the Supermicro product page to see the list of
compatible GPUs
•
Single width GPUs can be used in just the same way as PCIe expansion cards.
•
Double width GPUs can be used in slot 3. Note that slot 4 will be unavailble.
See Chapter 3, PCI Expansion Cards
Adding GPUs
1. Power down the system, unplug AC cords, and remove the top chassis cover.
2. Remove the appropriate riser card bracket. On the rear of the chassis, each bracket is
secured by a small black plastic flip-lever with an arrow on it. Flip open the appropriate
lever to release the bracket, then pull the bracket out of the chassis.
3. Insert the GPU into the riser card slot while aligning the GPU rear L-shaped mounting
bracket. Add screws to secure the GPU L-shaped mounting bracket.
1
Figure F-1. Expansion Card Chassis Slots
for details on the various riser card options.
89
Chapter 6: Optional Components
2
3
4