CDA SK410SS Installation - Use - Maintenance page 23

Single
Table of Contents

Advertisement

Changing the bulb - Lateral lights (Figs 10 & 11)
• Remove all shelves and the grill pan from the oven.
• Gently unclip the side rack from its lower locating stud and unhook
its top to remove it.
Note: No tools are required and the stud should not be removed.
• Carefully detach the glass cover from the lamp holder, by sliding
it upward then easing the bottom
outward.
• Carefully remove the old bulb and
insert a new bulb, suitable for high
temperatures (300ºC) having the
following specifications: 230-240V,
50Hz, 25W, G9 fitting.
• Insert the new bulb taking care not
to touch the glass with your hands as
contamination from your fingers can
cause premature failure. Always use a
clean cloth or gloves.
• Reattach the glass cover, pressing it
firmly into position.
• Replace the side rack by locating the
two hooks at the top and clipping it
back into position on its lower fixing
stud.
• Replace the oven shelves and grill
pan as necessary.
Fig. 10
Fig. 11
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sk410

Table of Contents