CDA SK410SS Installation - Use - Maintenance page 21

Single
Table of Contents

Advertisement

Suitable proprietary chemical cleaners may be used after first
consulting with the manufacturer's recommendations and testing a
sample on a small area of the oven cavity. Abrasive cleaning agents
or scouring pads/cloths should not be used on the cavity surface.
Oven door glass
As the oven door is triple glazed, the inner glasses may be removed
for cleaning both inner glasses and the inside face of the outer glass.
You may find it easier to remove the complete door to dismantle the
glass but it is not essential to do so: Door removal is explained on the
next page.
To remove the inner glass
Remove both door top corner pieces; these can be removed
by pressing the buttons shown at
position "A" in fig. 4, then sliding the
corner pieces toward you.
Lift the edge of the glass nearest to
you slightly then slide it from its lower
clips.
After cleaning the glass, replacement
is a reversal of the removal process.
Take care to assemble the glass the
right way around, the printed surface
must be visible when the door is
opened.
Fig. 4
A
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sk410

Table of Contents