Compaq Contura 400 Maintenance And Service Manual page 179

7. Ensure that the cable has been seated evenly and that the white line on
the cable is level.
8. Replace the keyboard assembly (Section 3.7).
Removing and Replacing the CTFT (8.4 inch) Display Shield
To remove the CTFT (8.4 inch) display shield, follow these steps:
1. Disconnect all power from the computer and remove the AC Adapter and
battery pack (Section 3.2).
2. Open the computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To prevent damage to the trough, ensure that the trough does not tilt
forward into the CPU base when the bezel is removed.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
3. Remove the display bezel (Section 3.21).