Table of Contents
Advertisement
Available languages
Available languages
EN
Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up.
The operator can control torque reactions or kickback forces, if proper precautions are taken.
Never place your hand near the rotating accessory. The accessory may kickback over your hand.
Do not position your body in the area where the power tool will move if kickback occurs. Kickback will propel the tool in the
direction opposite to the wheel's movement at the point of snagging.
Use special care when working corners, sharp edges, etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or
bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control
over the power tool.
Intended Use
Angle grinders are intended for cutting, roughing and brushing metal and stone materials without using water.
They can also be used as sanding tools when combined with the appropriate approved sanding disks and pads.
Concrete grinders are suitable for grinding cement and other similar surfaces.
Functional Description and Specifications
The following numbering refers to the illustration of the
machine indicated on page 2.
1
On/Off Switch
1a On/Off Switch safety button*
2
Protective Guard
3
Inner Flange
4
Outer Flange
5
Spindle Lock Button
6
Speed Adjustment Selector*
7
Main Handle Adjustment Button*
8
Carbon Brush socket Cover
9
Secondary handle*
10 Spanner*
11 Ventilation Slots
Technical Data
Model:
BAG1450
Rated Voltage:
230V
Rated Frequency
50/60Hz
Input Power:
1400w
No load Speed:
2800-10000rpm
Ø
125mm
5
* The manufacturer reserves the right to make minor changes to product
design and technical specifications without prior notice unless these changes
significantly affect the performance and safety of the products. The parts
described / illustrated in the pages of the manual that you hold in your hands
may also concern other models of the manufacturer's product line with
similar features and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be voided
if the machine is used in commercial, trade or industrial businesses or for
equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity,
all repair, inspection, repair or replacement work, including maintenance
and special adjustments, must only be carried out by technicians of the
authorized service department of the manufacturer.
WWW.BORMANNTOOLS.COM
* The accessories illustrated or described are not
included as standard delivery.
Advertisement
Table of Contents
