Navigation And Item Selection; System Information - HP Compaq Presario,Presario R4000 Hardware And Software Manual

Setup Utility

Navigation and Item Selection

Because the Setup utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■
To choose a menu or a menu item, use the arrow keys.
■
To choose an item in a drop-down list or to toggle a field, for
example an Enable/Disable field, use either the arrow keys or
f5
■
To select an item, press
■
To close a text box or return to the menu display, press
An on-screen guide to navigation and selection is displayed at the
lower edge of most Setup utility submenu screens. To display
additional navigation and selection information while the Setup
utility is open, press

System Information

The following procedure explains how to display system
information in the Setup utility. If the Setup utility is not open,
begin at step 1. If the Setup utility is open, begin at step 3.
1. If you are not sure whether the notebook is off or in
hibernation, press the power button. (The notebook turns
on or restores from hibernation.)
2. Display the Setup message:
❏
❏
3. Press
lower-left corner of the screen.
13–4
or .
f6
f1.
If the notebook is on, restart the notebook through the
operating system.
If you are certain that the notebook is off and not in
hibernation, turn the notebook on.
while the Setup message is displayed in the
f10
enter.
Hardware and Software Guide
esc.