Selecting A Location Setting; Viewing The Current Location Selection; Adding New Locations When Traveling - HP Notebook Reference Manual

3. Plug the modem cable adapter (3) into the telephone wall jack.

Selecting a location setting

Viewing the current location selection

To view the current location:
1. Select Start > Control Panel.
2. Click Clock, Language, and Region.
3. Click Region and Language.
4. Click the Location tab to display your location.

Adding new locations when traveling

On a new computer, the only location setting available to the modem is a location setting for the
country or region in which you purchased the computer. As you travel to different countries or
regions, set the internal modem to a location setting that meets the operating standards of the country
or region in which you are using the modem.
As you add new location settings, they are saved by the computer so that you can switch among
settings at any time. You can add multiple location settings for any country or region.
CAUTION:
current modem country or region settings. To enable modem use in other countries or regions while
preserving your home country or region configuration, add a new configuration for each location in
which you will use the modem.
CAUTION:
telecommunications regulations and laws of the country or region you are visiting, select the country
or region in which the computer is located. The modem may not function properly if the correct
country or region selection is not made.
10 Chapter 2 Networking (select models only)
To reduce the risk of losing your home country or region settings, do not delete your
To reduce the risk of configuring the modem in a way that violates the
Meijer.com