Expansion Port 2 Input/Output Signals - HP Compaq Presario,Presario R4000 Hardware And Software Manual

Expansion Port 2 Input/Output Signals

The signal information in this section may be helpful if you
plan to use an optional expansion product that connects to the
expansion port 2 on your notebook. (The notebook has only one
expansion port. The term expansion port 2 describes the type
of expansion port.)
The expansion port 2 is illustrated in
in Chapter 1, "Component ID."
The following table identifies the input and output signals
supported by the expansion port 2 on your notebook.
Feature
USB 2.0
10/100 Ethernet
Gigabit Ethernet
IEEE 1394 (4-pin port)
Consumer IR (for optional remote control only)
Power inputs
Composite TV*
S-Video TV
Component TV
S/PDIF audio*
DVI
Headphone/speaker audio-out
Microphone audio-in
*Requires the use of an optional expansion product.
Hardware and Software Guide
"Right-Side Components"
Support
Yes
Yes
No
Yes
Yes
90-W to
240-W maximum
Yes
Yes
No
Yes
No
Yes
Yes
Specifications
17–3