Setup Utility Language
The following procedure explains how to change the language of
the Setup utility. If the notebook is not in the Setup utility, begin
at step 1. If the notebook is in the Setup utility, begin at step 3.
1. If you are not sure whether the notebook is off or in
hibernation, press the power button. (The notebook is turned
on or restored from hibernation.)
2. Display the Setup message:
❏
❏
3. Press
4. Use the arrow keys to select the Advanced menu.
5. Use the arrow keys to select Language Support.
6. Press
7. To set your preferences and exit the Setup utility, press
and then follow the instructions on the screen. Your
preferences are in effect when the notebook restarts in
Windows.
Hardware and Software Guide
If the notebook is on, restart the notebook through the
operating system.
If you are certain that the notebook is off and not in
hibernation, turn the notebook on.
while the Setup message is displayed.
f10
or
to select a language.
f5
f6
Setup Utility
f10
13–3