Computer Feet; Memory Module - HP Compaq Presario,Presario F500 Maintenance And Service Manual

Computer feet

Description
Rubber Feet Kit (includes 4 base enclosure rubber feet)
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
shown below.

Memory module

Description
1024-MB (PC2-4200, 533-MHz, 1-DIMM)
1024-MB (PC2-5300, 667-MHz, 1-DIMM)
512-MB (PC2-5300, 667-MHz, 1-DIMM)
256-MB (PC2-5300, 667-MHz, 1-DIMM)
** For use with F550–F579, G6000 models
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the memory module:
Position the computer with the front toward you.
1.
Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory module compartment cover
2.
to the computer.
32 Chapter 4 Removal and replacement procedures
Battery on page 29).
Spare part number
431431-001
Spare part number
443489-001
450610-001**
428879-001
445975-001