Setup Utility; Starting The Setup Utility - HP Compaq Presario,Presario F500 Maintenance And Service Manual

Setup Utility

5
WARNING!
troubleshooting and repair procedures are detailed to allow repair at only the subassembly or module
level. Because of the complexity of the individual boards and subassemblies, do not attempt to make
repairs at the component level or modify any printed wiring board. Improper repairs can create a safety
hazard. Any indication of component replacement or printed wiring board modification may void any
warranty or exchange allowances.

Starting the Setup Utility

The Setup Utility is a ROM-based information and customization utility that can be used even when your
Windows operating system is not working or will not load.
NOTE: The fingerprint reader (select models only) does not work when accessing the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other
preferences.
To start the Setup Utility:
Turn on or restart the computer.
1.
Before Windows opens and while "Press <F10> to enter setup" is displayed in the lower-left corner
2.
of the screen, press f10.
62 Chapter 5 Setup Utility
Only authorized technicians trained by HP should repair this equipment. All