Using System Restore Points; When To Create Restore Points; Create A System Restore Point; Restore To A Previous Date And Time - HP Compaq Presario,Presario F500 Maintenance And Service Manual

To copy the screen and paste it into a word-processing document:
Display the screen.
a.
Copy the screen:
b.
To copy only the active window, press
To copy the entire screen, press
Open a word-processing document, and then select Edit> Paste.
c.

Using system restore points

When you back up your system, you are creating a system restore point. A system restore point allows
you to save and name a snapshot of your hard drive at a specific point in time. You can then recover
back to that point if you want to reverse subsequent changes made to your system.
NOTE: Recovering to an earlier restore point does not affect data files saved or e-mails created since
the last restore point.
You also can create additional restore points to provide increased protection for your system files and
settings.

When to create restore points

Before you add or extensively modify software or hardware.
●
Periodically, whenever the system is performing optimally.
●
NOTE:

Create a system restore point

Select Start > Control Panel> System and Maintenance > System.
1.
In the left pane, click System protection.
2.
Click the System Protection tab.
3.
Under Automatic restore points, select the disk for which you want to create a restore point.
4.
Click Create.
5.
The System Protection window opens.
Follow the on-screen instructions.
6.

Restore to a previous date and time

Select Start > Control Panel> System and Maintenance > System.
1.
In the left pane, click System protection.
2.
Click the System Protection tab.
3.
Click the System Restore button, and then click Next.
4.
92 Chapter 8 Backup and Recovery
If you revert to a restore point and then change your mind, you can reverse the restoration.
alt+fn+prt sc.
fn+prt sc.